mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 01:17:07 +06:00
03df754551
Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> Co-authored-by: Thys de Wet <thys@vectorphoto.co.uk>
34 lines
1.3 KiB
Markdown
34 lines
1.3 KiB
Markdown
# grandiceps
|
|
|
|
|
|
|
|
ARM split keyboard with RGB underglow and encoders.
|
|
|
|
* Keyboard Maintainer: [vattern](https://github.com/vattern)
|
|
* Hardware Supported: f411 blackpill
|
|
* Hardware Availability: [grandiceps](https://github.com/vattern/grandiceps)
|
|
|
|
There are two versions of the Grandiceps. Please use the appropriate firmware for your board.
|
|
|
|
* Revision 2 has I2C eeprom and support for a Pimoroni trackball.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make tkw/grandiceps:default
|
|
make tkw/grandiceps/rev2:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make tkw/grandiceps:default:flash
|
|
make tkw/grandiceps/rev2:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset buttons**: Hold down the BOOT0 button and then briefly press the NRST button on the BlackPill PCB.
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|