mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 17:37:40 +06:00
0c9c2fea54
* add matrix_diagram.md * info.json: apply friendly formatting * add LAYOUT_1800_f13_ansi_split_numenter * add LAYOUT_1800_f13_ansi_split_bs_numenter * add LAYOUT_1800_f13_ansi_wkl_split_numenter * add LAYOUT_1800_f13_ansi_wkl_split_bs_numenter * add LAYOUT_1800_f13_iso_split_bs_numenter * add LAYOUT_1800_f13_iso_split_numenter * add LAYOUT_1800_f13_iso_wkl_split_numenter * add LAYOUT_1800_f13_iso_wkl_split_bs_numenter * correct listed maintainer Maintainer has changed their GitHub username.
27 lines
1.1 KiB
Markdown
27 lines
1.1 KiB
Markdown
# CherryB Studio CB1800
|
|
|
|
|
|
|
|
A G80-1800 inspired PCB for CB1800 Zakabato and any suitable 1800 layout keyboards.
|
|
|
|
* Keyboard Maintainer: [lunaticwhat](https://github.com/lunaticwhat)
|
|
* Hardware Supported: cb1800, atmega32u4
|
|
* Hardware Availability: [CherryB Studio](https://www.reddit.com/r/mechmarket/comments/mneayy/ic_cb1800zanbato_1800_classic_by_cherryb/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make cherrybstudio/cb1800:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make cherrybstudio/cb1800:default:flash
|
|
|
|
## Accessing Bootloader Mode
|
|
|
|
To access Bootloader Mode, do one of the following:
|
|
|
|
* Tap the Reset switch mounted on the top side of the PCB to the left of the spacebar
|
|
* Hold the top left key of the keyboard while connecting the USB cable
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|