mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-29 04:39:26 +06:00
53 lines
1.7 KiB
Markdown
53 lines
1.7 KiB
Markdown
# RGB
|
|
|
|
Custom RGB code can be disabled by setting `CUSTOM_RGBLIGHT = no` or `CUSTOM_RGB_MATRIX = no` in your `rules.mk`
|
|
|
|
## RGB Light
|
|
|
|
### Layer Indication Code
|
|
|
|
At least for RGB Light, the `layer_state_set` function is used to detect the current highest layer, and change the underglow based on that layer.
|
|
|
|
This works for both the regular layers, and for the default layers, too.
|
|
|
|
I use the sethsv variants of the commands, so that different modes can be used, as well.
|
|
|
|
RGB Matrix uses a custom, per board implementation, at the moment.
|
|
|
|
### RGB Light Startup Animation
|
|
|
|
On startup, if enabled, the board will cycle through the entire hue wheel, starting and ending on the default layer color.
|
|
|
|
```c
|
|
void keyboard_post_init_rgb(void) {
|
|
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_STARTUP_ANIMATION)
|
|
if (userspace_config.rgb_layer_change) { rgblight_enable_noeeprom(); }
|
|
if (rgblight_config.enable) {
|
|
layer_state_set_user(layer_state);
|
|
uint16_t old_hue = rgblight_config.hue;
|
|
rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
|
|
for (uint16_t i = 255; i > 0; i--) {
|
|
rgblight_sethsv_noeeprom( ( i + old_hue) % 255, 255, 255);
|
|
matrix_scan();
|
|
wait_ms(10);
|
|
}
|
|
}
|
|
#endif
|
|
layer_state_set_user(layer_state);
|
|
}
|
|
```
|
|
|
|
This could probably benefit from some cleanup and better handling.
|
|
|
|
## RGB Matrix
|
|
|
|
### Idle Animation
|
|
|
|
This feature can be toggled with the `RGB_IDL` keycode.
|
|
|
|
This sets the mode to the Heatmap Animation when typing, but will switch to the cycle in animations when idle.
|
|
|
|
### Layer Indication
|
|
|
|
This sets the modifier keys to indicate the current layer state, with the option to override the behavior.
|