mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-30 21:38:01 +06:00
15d7c5f0bd
* remove unneeded uart setting * use pragma once everywhere * remove custom matrix support * fixup readme * set bootmagic to lite * remove dependency on custom i2c code * use the right header files and function calls * remove bootmagic support as it doesn't work on bmc boards * readme merge artifacts removal
49 lines
2.0 KiB
Markdown
49 lines
2.0 KiB
Markdown
# panc60
|
|
|
|
|
|
|
|
The panc60 is a 60% PCB with backlight and rgb underglow.
|
|
|
|
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Jack Humbert](https://github.com/jackhumbert)
|
|
Hardware Supported: panc60 PCB
|
|
Hardware Availability: [PANC Interactive](https://store.panc.co/product/panc60-60-pcb)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make panc60:default
|
|
|
|
Flashing
|
|
|
|
**Reset Key:** Hold down the key located at `K40`, commonly programmed as left control while plugging in the keyboard.
|
|
|
|
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
|
|
|
|
To put the panc60 into reset, hold left control while plugging in.
|
|
|
|
Windows:
|
|
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
|
|
2. Place your keyboard into reset.
|
|
3. Press the `Find Device` button and ensure that your keyboard is found.
|
|
4. Press the `Open .hex File` button and locate the `.hex` file you created.
|
|
5. Press the `Flash Device` button and wait for the process to complete.
|
|
|
|
macOS:
|
|
1. Install homebrew by typing the following:
|
|
```
|
|
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
|
|
```
|
|
2. Install `crosspack-avr`.
|
|
```
|
|
brew cask install crosspack-avr
|
|
```
|
|
3. Install the following packages:
|
|
```
|
|
brew install python3
|
|
pip3 install pyusb
|
|
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
|
|
|
|
4. Place your keyboard into reset.
|
|
5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|