mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-25 18:06:34 +06:00
47 lines
3.0 KiB
Markdown
47 lines
3.0 KiB
Markdown
# Swap-Hands Action
|
|
|
|
The swap-hands action allows support for one-handed typing without requiring a separate layer. Set `SWAP_HANDS_ENABLE` in the Makefile and define a `hand_swap_config` entry in your keymap. Now whenever the `ACTION_SWAP_HANDS` command key is pressed the keyboard is mirrored. For instance, to type "Hello, World" on QWERTY you would type `^Ge^s^s^w^c W^wr^sd`
|
|
|
|
## Configuration
|
|
|
|
The configuration table is a simple 2-dimensional array to map from column/row to new column/row. Example `hand_swap_config` for Planck:
|
|
|
|
```c
|
|
const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
|
|
{{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
|
|
{{11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
|
|
{{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
|
|
{{11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}},
|
|
};
|
|
```
|
|
|
|
Note that the array indices are reversed same as the matrix and the values are of type `keypos_t` which is `{col, row}` and all values are zero-based. In the example above, `hand_swap_config[2][4]` (third row, fifth column) would return `{7, 2}` (third row, eighth column). Yes, this is confusing.
|
|
|
|
## Swap Keycodes
|
|
|
|
|Key |Description |
|
|
|-----------|-------------------------------------------------------------------------|
|
|
|`SH_T(key)`|Sends `key` with a tap; momentary swap when held. |
|
|
|`SH_ON` |Turns on swapping and leaves it on. |
|
|
|`SH_OFF` |Turn off swapping and leaves it off. Good for returning to a known state.|
|
|
|`SH_MON` |Swaps hands when pressed, returns to normal when released (momentary). |
|
|
|`SH_MOFF` |Momentarily turns off swap. |
|
|
|`SH_TG` |Toggles swap on and off with every key press. |
|
|
|`SH_TT` |Momentary swap when held, toggles with repeated taps (see below). |
|
|
|`SH_OS` |One shot swap hands: toggles while pressed or until next key press. |
|
|
|
|
`SH_TT` swap-hands tap-toggle key is similar to [layer tap-toggle](feature_layers.md?id=switching-and-toggling-layers). Tapping repeatedly (5 taps by default) will toggle swap-hands on or off, like `SH_TG`. Tap-toggle count can be changed by defining a value for `TAPPING_TOGGLE`.
|
|
|
|
## Encoder Mapping
|
|
|
|
When using an encoder mapping, it's also able to handle swapping encoders between sides, too.
|
|
|
|
Encoder indexes are defined as left-to-right, and the extent of the array needs to match the number of encoders on the keyboard.
|
|
|
|
As an example, if a split keyboard has a single encoder per side, you can swap the order by using the following code in your keymap:
|
|
```c
|
|
#if defined(SWAP_HANDS_ENABLE) && defined(ENCODER_MAP_ENABLE)
|
|
const uint8_t PROGMEM encoder_hand_swap_config[NUM_ENCODERS] = { 1, 0 };
|
|
#endif
|
|
```
|