mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-29 21:08:38 +06:00
221 lines
7.2 KiB
Markdown
221 lines
7.2 KiB
Markdown
# Joystick :id=joystick
|
|
|
|
This feature provides game controller input as a joystick device supporting up to 6 axes and 32 buttons. Axes can be read either from an [ADC-capable input pin](adc_driver.md), or can be virtual, so that its value is provided by your code.
|
|
|
|
An analog device such as a [potentiometer](https://en.wikipedia.org/wiki/Potentiometer) found on an analog joystick's axes is based on a voltage divider, where adjusting the movable wiper controls the output voltage which can then be read by the microcontroller's ADC.
|
|
|
|
## Usage :id=usage
|
|
|
|
Add the following to your `rules.mk`:
|
|
|
|
```make
|
|
JOYSTICK_ENABLE = yes
|
|
```
|
|
|
|
By default the joystick driver is `analog`, but you can change this with:
|
|
|
|
```make
|
|
JOYSTICK_DRIVER = digital
|
|
```
|
|
|
|
## Configuration :id=configuration
|
|
|
|
By default, two axes and eight buttons are defined, with a reported resolution of 8 bits (-127 to +127). This can be changed in your `config.h`:
|
|
|
|
```c
|
|
// Min 0, max 32
|
|
#define JOYSTICK_BUTTON_COUNT 16
|
|
// Min 0, max 6: X, Y, Z, Rx, Ry, Rz
|
|
#define JOYSTICK_AXIS_COUNT 3
|
|
// Min 8, max 16
|
|
#define JOYSTICK_AXIS_RESOLUTION 10
|
|
```
|
|
|
|
?> You must define at least one button or axis. Also note that the maximum ADC resolution of the supported AVR MCUs is 10-bit, and 12-bit for most STM32 MCUs.
|
|
|
|
### Axes :id=axes
|
|
|
|
When defining axes for your joystick, you must provide a definition array typically in your `keymap.c`.
|
|
|
|
For instance, the below example configures two axes. The X axis is read from the `A4` pin. With the default axis resolution of 8 bits, the range of values between 900 and 575 are scaled to -127 through 0, and values 575 to 285 are scaled to 0 through 127. The Y axis is configured as a virtual axis, and its value is not read from any pin. Instead, the user must update the axis value programmatically.
|
|
|
|
```c
|
|
joystick_config_t joystick_axes[JOYSTICK_AXIS_COUNT] = {
|
|
JOYSTICK_AXIS_IN(A4, 900, 575, 285),
|
|
JOYSTICK_AXIS_VIRTUAL
|
|
};
|
|
```
|
|
|
|
Axes can be configured using one of the following macros:
|
|
|
|
* `JOYSTICK_AXIS_IN(input_pin, low, rest, high)`
|
|
The ADC samples the provided pin. `low`, `high` and `rest` correspond to the minimum, maximum, and resting (or centered) analog values of the axis, respectively.
|
|
* `JOYSTICK_AXIS_VIRTUAL`
|
|
No ADC reading is performed. The value should be provided by user code.
|
|
|
|
The `low` and `high` values can be swapped to effectively invert the axis.
|
|
|
|
#### Virtual Axes :id=virtual-axes
|
|
|
|
The following example adjusts two virtual axes (X and Y) based on keypad presses, with `KC_P0` as a precision modifier:
|
|
|
|
```c
|
|
joystick_config_t joystick_axes[JOYSTICK_AXIS_COUNT] = {
|
|
JOYSTICK_AXIS_VIRTUAL, // x
|
|
JOYSTICK_AXIS_VIRTUAL // y
|
|
};
|
|
|
|
static bool precision = false;
|
|
static uint16_t precision_mod = 64;
|
|
static uint16_t axis_val = 127;
|
|
|
|
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
|
int16_t precision_val = axis_val;
|
|
if (precision) {
|
|
precision_val -= precision_mod;
|
|
}
|
|
|
|
switch (keycode) {
|
|
case KC_P8:
|
|
joystick_set_axis(1, record->event.pressed ? -precision_val : 0);
|
|
return false;
|
|
case KC_P2:
|
|
joystick_set_axis(1, record->event.pressed ? precision_val : 0);
|
|
return false;
|
|
case KC_P4:
|
|
joystick_set_axis(0, record->event.pressed ? -precision_val : 0);
|
|
return false;
|
|
case KC_P6:
|
|
joystick_set_axis(0, record->event.pressed ? precision_val : 0);
|
|
return false;
|
|
case KC_P0:
|
|
precision = record->event.pressed;
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
```
|
|
|
|
## Keycodes :id=keycodes
|
|
|
|
|Key |Aliases|Description|
|
|
|-----------------------|-------|-----------|
|
|
|`QK_JOYSTICK_BUTTON_0` |`JS_0` |Button 0 |
|
|
|`QK_JOYSTICK_BUTTON_1` |`JS_1` |Button 1 |
|
|
|`QK_JOYSTICK_BUTTON_2` |`JS_2` |Button 2 |
|
|
|`QK_JOYSTICK_BUTTON_3` |`JS_3` |Button 3 |
|
|
|`QK_JOYSTICK_BUTTON_4` |`JS_4` |Button 4 |
|
|
|`QK_JOYSTICK_BUTTON_5` |`JS_5` |Button 5 |
|
|
|`QK_JOYSTICK_BUTTON_6` |`JS_6` |Button 6 |
|
|
|`QK_JOYSTICK_BUTTON_7` |`JS_7` |Button 7 |
|
|
|`QK_JOYSTICK_BUTTON_8` |`JS_8` |Button 8 |
|
|
|`QK_JOYSTICK_BUTTON_9` |`JS_9` |Button 9 |
|
|
|`QK_JOYSTICK_BUTTON_10`|`JS_10`|Button 10 |
|
|
|`QK_JOYSTICK_BUTTON_11`|`JS_11`|Button 11 |
|
|
|`QK_JOYSTICK_BUTTON_12`|`JS_12`|Button 12 |
|
|
|`QK_JOYSTICK_BUTTON_13`|`JS_13`|Button 13 |
|
|
|`QK_JOYSTICK_BUTTON_14`|`JS_14`|Button 14 |
|
|
|`QK_JOYSTICK_BUTTON_15`|`JS_15`|Button 15 |
|
|
|`QK_JOYSTICK_BUTTON_16`|`JS_16`|Button 16 |
|
|
|`QK_JOYSTICK_BUTTON_17`|`JS_17`|Button 17 |
|
|
|`QK_JOYSTICK_BUTTON_18`|`JS_18`|Button 18 |
|
|
|`QK_JOYSTICK_BUTTON_19`|`JS_19`|Button 19 |
|
|
|`QK_JOYSTICK_BUTTON_20`|`JS_20`|Button 20 |
|
|
|`QK_JOYSTICK_BUTTON_21`|`JS_21`|Button 21 |
|
|
|`QK_JOYSTICK_BUTTON_22`|`JS_22`|Button 22 |
|
|
|`QK_JOYSTICK_BUTTON_23`|`JS_23`|Button 23 |
|
|
|`QK_JOYSTICK_BUTTON_24`|`JS_24`|Button 24 |
|
|
|`QK_JOYSTICK_BUTTON_25`|`JS_25`|Button 25 |
|
|
|`QK_JOYSTICK_BUTTON_26`|`JS_26`|Button 26 |
|
|
|`QK_JOYSTICK_BUTTON_27`|`JS_27`|Button 27 |
|
|
|`QK_JOYSTICK_BUTTON_28`|`JS_28`|Button 28 |
|
|
|`QK_JOYSTICK_BUTTON_29`|`JS_29`|Button 29 |
|
|
|`QK_JOYSTICK_BUTTON_30`|`JS_30`|Button 30 |
|
|
|`QK_JOYSTICK_BUTTON_31`|`JS_31`|Button 31 |
|
|
|
|
## API :id=api
|
|
|
|
### `struct joystick_t` :id=api-joystick-t
|
|
|
|
Contains the state of the joystick.
|
|
|
|
#### Members :id=api-joystick-t-members
|
|
|
|
- `uint8_t buttons[]`
|
|
A bit-packed array containing the joystick button states. The size is calculated as `(JOYSTICK_BUTTON_COUNT - 1) / 8 + 1`.
|
|
- `int16_t axes[]`
|
|
An array of analog values for each defined axis.
|
|
- `bool dirty`
|
|
Whether the current state needs to be sent to the host.
|
|
|
|
---
|
|
|
|
### `struct joystick_config_t` :id=api-joystick-config-t
|
|
|
|
Describes a single axis.
|
|
|
|
#### Members :id=api-joystick-config-t-members
|
|
|
|
- `pin_t input_pin`
|
|
The pin to read the analog value from, or `JS_VIRTUAL_AXIS`.
|
|
- `uint16_t min_digit`
|
|
The minimum analog value.
|
|
- `uint16_t mid_digit`
|
|
The resting or midpoint analog value.
|
|
- `uint16_t max_digit`
|
|
The maximum analog value.
|
|
|
|
---
|
|
|
|
### `void joystick_flush(void)` :id=api-joystick-flush
|
|
|
|
Send the joystick report to the host, if it has been marked as dirty.
|
|
|
|
---
|
|
|
|
### `void register_joystick_button(uint8_t button)` :id=api-register-joystick-button
|
|
|
|
Set the state of a button, and flush the report.
|
|
|
|
#### Arguments :id=api-register-joystick-button-arguments
|
|
|
|
- `uint8_t button`
|
|
The index of the button to press, from 0 to 31.
|
|
|
|
---
|
|
|
|
### `void unregister_joystick_button(uint8_t button)` :id=api-unregister-joystick-button
|
|
|
|
Reset the state of a button, and flush the report.
|
|
|
|
#### Arguments :id=api-unregister-joystick-button-arguments
|
|
|
|
- `uint8_t button`
|
|
The index of the button to release, from 0 to 31.
|
|
|
|
---
|
|
|
|
### `int16_t joystick_read_axis(uint8_t axis)` :id=api-joystick-read-axis
|
|
|
|
Sample and process the analog value of the given axis.
|
|
|
|
#### Arguments :id=api-joystick-read-axis-arguments
|
|
|
|
- `uint8_t axis`
|
|
The axis to read.
|
|
|
|
#### Return Value :id=api-joystick-read-axis-return
|
|
|
|
A signed 16-bit integer, where 0 is the resting or mid point.
|
|
|
|
### `void joystick_set_axis(uint8_t axis, int16_t value)` :id=api-joystick-set-axis
|
|
|
|
Set the value of the given axis.
|
|
|
|
#### Arguments :id=api-joystick-set-axis-arguments
|
|
|
|
- `uint8_t axis`
|
|
The axis to set the value of.
|
|
- `int16_t value`
|
|
The value to set.
|