keychron_qmk_firmware/keyboards/handwired/fc200rt_qmk/readme.md

fc200rt_qmk

A Leopold FC200RT rewired with Teensy 2.0

Uses original row and column matrix, so you can wire the teensy 2.0 to the corrosposnding column and row numbers and flash this firmware to the teensy.

Pinout of Leopold's matrix:

	c0	c1	c2	c3	c4	c5	c6	c7	c8	c9	c10	c11	c12	c13	c14	c15
r0	PAUS	Q	W	E	R	U	I	O	P	SLCK
r1	LGUI	TAB	CAPS	F3	T	Y	RBRC	F7	LBRC		BSPC					LSFT
r2		A		D	F	J	K	L	SCLN	RGUI	BSLS					RSFT
r3		ESC	X	F4	G	H	F6		QUOT	LALT	F11	SPC			UP
r4		Z		C	V	M	COMM	DOT			ENT
r5					B	N		APP	SLSH	RALT	F12	DOWN	RGHT		LEFT
r6	LCTL	GRV	F1	F2	5	6	EQL	F8	MINS		F9	DEL	INS	PGUP	HOME
r7	F5	1	2	3	4	7	8	9	0	PSCR	F10			PGDN	END

Choose any key from the corrosponding row and column and solder it to the pin on the Teensy listed in the firmware config.h

NOTE: Some of the keys had mislabled columns and rows, so make sure the columns are all connected without diodes to one another, and that the rows are soldered after the diode

• Keyboard Maintainer: NaCly
• Hardware Supported: The PCBs, controllers supported
• Hardware Availability: Leopold FC200RT + Teensy 2.0

Make example for this keyboard (after setting up your build environment):

make handwired/fc200rt_qmk:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.