mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-26 02:17:38 +06:00
25 lines
1.1 KiB
Markdown
Executable File
25 lines
1.1 KiB
Markdown
Executable File
# Hub16
|
|
|
|
Hub16 is a 16 Key Macro Pad with an inbuilt USB 2.0 hub and dual rotary encoders.
|
|
|
|
For more information regarding the keyboard, please visit the [Hub16 Website](https://www.joshajohnson.com/hub16-keyboard/) or [GitHub Repo](https://github.com/joshajohnson/Hub16).
|
|
|
|
* Keyboard Maintainer: [Josh Johnson](https://github.com/joshajohnson)
|
|
* Hardware Supported: Hub16 PCB (atmega32u4)
|
|
* Hardware Availability: [Josh Johnson](https://www.joshajohnson.com/hub16-keyboard/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make hub16:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make hub16:default:flash
|
|
|
|
To reset the board into bootloader mode, do one of the following:
|
|
|
|
* Press the reset switch between the center two USB-C ports while the board is plugged in
|
|
* Hold the top left key while connecting the USB cable (also erases persistent settings)
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|