mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-23 00:47:02 +06:00
Code Issues Packages Projects Releases Wiki Activity
c0d57a6826
keychron_qmk_firmware/keyboards/gmmk/pro/rev1/iso/readme.md
GloriousThrall 83fa6fe916
Move GMMK Pro to allow for multiple revisions (#16423) 
* Added GMMK PRO Rev2 WBG7 MCU compatibility. Added GMMK 2 WBG7 MCU compatibility.

* GMMK PRO MCU Updates only (removed other kbs)

* fix problems

* Optimize the code.

* Update form develop branch

* Update

* Updater from qmk/develop

* Update

* Update config.h

* Update config.h

* Remove gmmk pro rev2

* move moults31/keymap.c

* Update

* tidy up

Co-authored-by: Joy <chang.li@westberrytech.com>
Co-authored-by: zvecr <git@zvecr.com>
2022-05-20 01:47:22 +01:00

1.9 KiB
Raw Blame History

GMMK PRO (ISO)

A tenkeyless 75% keyboard made and sold by Glorious LLC. Equipped with the STM32 ARM Cortex-M4 microcontroller, with support for rotary encoders and three additional layouts. More info at Glorious

Make example for this keyboard (after setting up your build environment):

make gmmk/pro/rev1/iso:default

Flashing example for this keyboard:

make gmmk/pro/rev1/iso:default:flash

To reset the board into bootloader mode, do one of the following:

  • Hold the Reset switch mounted on the bottom side of the PCB while connecting the USB cable
  • Hold the Escape key while connecting the USB cable (also erases persistent settings)
  • Fn+Backspace will reset the board to bootloader mode if you have flashed the default QMK keymap

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Case Screw Replacements

Many users report stripped case screws when disassembling the board.

The stock case screws are:

  • Thread: M2
  • Thread length: ~5 mm
  • Head diameter: ~3.8 mm
  • Head counterbore diameter: ~4.0 mm
  • Head counterbore depth: ~1.9 mm

Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore. For reference, this hex socket head screw from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm).