mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 17:37:40 +06:00
cfe8c4dee3
* Implement Sha keyboard with default layout * Adjust readme and info.json per PR checklist * Fix RGB Light description in default keymap readme * Update keyboards/sha/rules.mk Move configuration to info.json Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/sha/info.json Move configuration to info.json Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/sha/info.json Move configuration to info.json Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/sha/info.json Define RGB animations in info.json Co-authored-by: Joel Challis <git@zvecr.com> * Enable RGB Lighting Layers at keymap level, not keyboard level --------- Co-authored-by: Joel Challis <git@zvecr.com>
28 lines
1.1 KiB
Markdown
28 lines
1.1 KiB
Markdown
# Sha
|
|
|
|
|
|
|
|
Sha is a 50 key ortholinear keyboard, powered by a Waveshare RP2040-Zero or Waveshare RP2040-Matrix.
|
|
|
|
* Keyboard Maintainer: [Steven Karrmann](https://github.com/skarrmann)
|
|
* Hardware Supported: Sha PCBs with either RP2040-Zero or RP2040-Matrix
|
|
* Hardware Availability: [Sha GitHub repository](https://github.com/skarrmann/sha)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make sha:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make sha:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard.
|
|
* **Physical reset button**: Doublet-tap the EN/RESET button on the MCU board.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
|