mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-28 11:47:32 +06:00
5878336f66
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
27 lines
1.4 KiB
Markdown
27 lines
1.4 KiB
Markdown
# waffling60
|
|
|
|
A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support.
|
|
|
|
More info: https://geekhack.org/index.php?topic=103531.0
|
|
|
|
* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
|
|
* Hardware Supported: [waffling60](https://github.com/4pplet/waffling60)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make 4pplet/waffling60/rev_a:default
|
|
make 4pplet/waffling60/rev_b:default
|
|
make 4pplet/waffling60/rev_c:default
|
|
make 4pplet/waffling60/rev_d:default
|
|
make 4pplet/waffling60/rev_e:default
|
|
make 4pplet/waffling60/rev_d_ansi:default
|
|
make 4pplet/waffling60/rev_d_iso:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
How to enter bootloader (DFU):
|
|
* Tap the physical reset button or short the reset-header (labled RESET) on tha back of the PCB for keyboard to enter DFU. When in DFU, it's ready to flash the firmware.
|
|
|
|
Alternative option if the firmware is already pre-flashed:
|
|
* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.
|