mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-24 09:27:36 +06:00
Code Issues Packages Projects Releases Wiki Activity
bc41d37baf
keychron_qmk_firmware/keyboards/kprepublic/bm80/readme.md
peepeetee 2742d0c4c1
[Keyboard] Add BM80 Keyboard (#12948) 
* Initial compatibility with bm80

* move files to kprepublic directory, see #12159

* fix pin assignment

* Revert "fix pin assignment"

This reverts commit 5a53a74953a23bb5064c11d5d9e6daf007a54872.

* add testing setup (peepeetee keymap, will use for personal purposes later), fix LED assignment, add indicator LED, LED location, count, and flags are broken

* fixed flags( not sure, please check)

* fixed number of LEDs

* add comment about f11

* remove comment about f11, change capslock flag to be 1 rather than 1+8 as there is a standalone indicator LED

* readme.md

* add via keymap

* add info.json with help from noroadsleft's converter

* add suspended state implementation, I don't think it's working

* update to my testing setup

* restore erroneously included bm68rgb config

* Update keyboards/kprepublic/bm80/config.h

Co-authored-by: Drashna Jaelre <drashna@live.com>

* add reset instructions

* change reset instruction grammar

* remove not working sleep function, add comment for RGB flags

* add LED mapping comments

* change readme grammar

* replace rgb light paremeters with rgb matrix paremeters, enable framebuffer effects

* re-enable peepeetee/config.h, updating my disabled effect list

* updating my disabled effect list

* update LED struct documentation

* update readme with RGB matrix effect information

* Update keyboards/kprepublic/bm80/rules.mk

Co-authored-by: Drashna Jaelre <drashna@live.com>

* move files back to keyboard from keyboard/kprepublic, see 85b33d6 and qmk#12159

* Apply suggestions from code review

Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>

* cleanup peepeetee keymap

* update peepeetee keymap; rebase on current master

* moved to /kprepublic, see #12159

* Apply suggestions from code review

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-09-27 22:00:47 -07:00

1.4 KiB
Raw Blame History

bm80

bm80

A tkl, hotswap, in switch RGB keyboard from KPRepublic.

Make example for this keyboard (after setting up your build environment):

make kprepublic/bm80:default

Flashing example for this keyboard:

make kprepublic/bm80:default:flash

To reset the board into bootloader mode, do one of the following:

  • Short the two-pad footprint between the "delete" key and the "end" key while the board is plugged in
  • Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
  • Hold the Esc key while connecting the USB cable (also erases persistent settings)

All of the RGB matrix effects are enabled by default. To disable specific ones, see this section for more information.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.