mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-25 18:48:05 +06:00
99f3df2893
* Add support for 8 buttons to mouse report This includes support for 8 buttons in mousekeys. However, this does move the keys around due to the fact that the last mousekey keycode is already 0xFF, so any past that would not work with register_code and the like, breaking them for tap hold keys, encoders, and other features. * Update mouse key docs * Add changes based on feedback * Fix VUSB report size comment Because drashna red gud * Fix typo in action.c * Fix IS_MOUSE_BUTTON check * Change start range for mousekeys so that the end is 0xFF properly * condense mousekeys check
176 lines
11 KiB
Markdown
176 lines
11 KiB
Markdown
# Mouse keys
|
||
|
||
Mouse keys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer at different speeds, press 5 buttons and scroll in 8 directions.
|
||
|
||
## Adding mouse keys to your keyboard
|
||
|
||
To use mouse keys, you must at least enable mouse keys support and map mouse actions to keys on your keyboard.
|
||
|
||
### Enabling mouse keys
|
||
|
||
To enable mouse keys, add the following line to your keymap’s `rules.mk`:
|
||
|
||
```c
|
||
MOUSEKEY_ENABLE = yes
|
||
```
|
||
|
||
### Mapping mouse actions
|
||
|
||
In your keymap you can use the following keycodes to map key presses to mouse actions:
|
||
|
||
|Key |Aliases |Description |
|
||
|----------------|---------|-----------------|
|
||
|`KC_MS_UP` |`KC_MS_U`|Move cursor up |
|
||
|`KC_MS_DOWN` |`KC_MS_D`|Move cursor down |
|
||
|`KC_MS_LEFT` |`KC_MS_L`|Move cursor left |
|
||
|`KC_MS_RIGHT` |`KC_MS_R`|Move cursor right|
|
||
|`KC_MS_BTN1` |`KC_BTN1`|Press button 1 |
|
||
|`KC_MS_BTN2` |`KC_BTN2`|Press button 2 |
|
||
|`KC_MS_BTN3` |`KC_BTN3`|Press button 3 |
|
||
|`KC_MS_BTN4` |`KC_BTN4`|Press button 4 |
|
||
|`KC_MS_BTN5` |`KC_BTN5`|Press button 5 |
|
||
|`KC_MS_BTN6` |`KC_BTN6`|Press button 6 |
|
||
|`KC_MS_BTN7` |`KC_BTN7`|Press button 7 |
|
||
|`KC_MS_BTN8` |`KC_BTN8`|Press button 8 |
|
||
|`KC_MS_WH_UP` |`KC_WH_U`|Move wheel up |
|
||
|`KC_MS_WH_DOWN` |`KC_WH_D`|Move wheel down |
|
||
|`KC_MS_WH_LEFT` |`KC_WH_L`|Move wheel left |
|
||
|`KC_MS_WH_RIGHT`|`KC_WH_R`|Move wheel right |
|
||
|`KC_MS_ACCEL0` |`KC_ACL0`|Set speed to 0 |
|
||
|`KC_MS_ACCEL1` |`KC_ACL1`|Set speed to 1 |
|
||
|`KC_MS_ACCEL2` |`KC_ACL2`|Set speed to 2 |
|
||
|
||
## Configuring mouse keys
|
||
|
||
Mouse keys supports three different modes to move the cursor:
|
||
|
||
* **Accelerated (default):** Holding movement keys accelerates the cursor until it reaches its maximum speed.
|
||
* **Kinetic:** Holding movement keys accelerates the cursor with its speed following a quadratic curve until it reaches its maximum speed.
|
||
* **Constant:** Holding movement keys moves the cursor at constant speeds.
|
||
* **Combined:** Holding movement keys accelerates the cursor until it reaches its maximum speed, but holding acceleration and movement keys simultaneously moves the cursor at constant speeds.
|
||
|
||
The same principle applies to scrolling.
|
||
|
||
Configuration options that are times, intervals or delays are given in milliseconds. Scroll speed is given as multiples of the default scroll step. For example, a scroll speed of 8 means that each scroll action covers 8 times the length of the default scroll step as defined by your operating system or application.
|
||
|
||
### Accelerated mode
|
||
|
||
This is the default mode. You can adjust the cursor and scrolling acceleration using the following settings in your keymap’s `config.h` file:
|
||
|
||
|Define |Default|Description |
|
||
|----------------------------|-------|---------------------------------------------------------|
|
||
|`MOUSEKEY_DELAY` |300 |Delay between pressing a movement key and cursor movement|
|
||
|`MOUSEKEY_INTERVAL` |50 |Time between cursor movements in milliseconds |
|
||
|`MOUSEKEY_MOVE_DELTA` |5 |Step size |
|
||
|`MOUSEKEY_MAX_SPEED` |10 |Maximum cursor speed at which acceleration stops |
|
||
|`MOUSEKEY_TIME_TO_MAX` |20 |Time until maximum cursor speed is reached |
|
||
|`MOUSEKEY_WHEEL_DELAY` |300 |Delay between pressing a wheel key and wheel movement |
|
||
|`MOUSEKEY_WHEEL_INTERVAL` |100 |Time between wheel movements |
|
||
|`MOUSEKEY_WHEEL_MAX_SPEED` |8 |Maximum number of scroll steps per scroll action |
|
||
|`MOUSEKEY_WHEEL_TIME_TO_MAX`|40 |Time until maximum scroll speed is reached |
|
||
|
||
Tips:
|
||
|
||
* Setting `MOUSEKEY_DELAY` too low makes the cursor unresponsive. Setting it too high makes small movements difficult.
|
||
* For smoother cursor movements, lower the value of `MOUSEKEY_INTERVAL`. If the refresh rate of your display is 60Hz, you could set it to `16` (1/60). As this raises the cursor speed significantly, you may want to lower `MOUSEKEY_MAX_SPEED`.
|
||
* Setting `MOUSEKEY_TIME_TO_MAX` or `MOUSEKEY_WHEEL_TIME_TO_MAX` to `0` will disable acceleration for the cursor or scrolling respectively. This way you can make one of them constant while keeping the other accelerated, which is not possible in constant speed mode.
|
||
* Setting `MOUSEKEY_WHEEL_INTERVAL` too low will make scrolling too fast. Setting it too high will make scrolling too slow when the wheel key is held down.
|
||
|
||
Cursor acceleration uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
|
||
|
||
### Kinetic Mode
|
||
|
||
This is an extension of the accelerated mode. The kinetic mode uses a quadratic curve on the cursor speed which allows precise movements at the beginning and allows to cover large distances by increasing cursor speed quickly thereafter. You can adjust the cursor and scrolling acceleration using the following settings in your keymap’s `config.h` file:
|
||
|
||
|Define |Default |Description |
|
||
|--------------------------------------|---------|---------------------------------------------------------------|
|
||
|`MK_KINETIC_SPEED` |undefined|Enable kinetic mode |
|
||
|`MOUSEKEY_DELAY` |8 |Delay between pressing a movement key and cursor movement |
|
||
|`MOUSEKEY_INTERVAL` |8 |Time between cursor movements in milliseconds |
|
||
|`MOUSEKEY_MOVE_DELTA` |25 |Step size for accelerating from initial to base speed |
|
||
|`MOUSEKEY_INITIAL_SPEED` |100 |Initial speed of the cursor in pixel per second |
|
||
|`MOUSEKEY_BASE_SPEED` |1000 |Maximum cursor speed at which acceleration stops |
|
||
|`MOUSEKEY_DECELERATED_SPEED` |400 |Decelerated cursor speed |
|
||
|`MOUSEKEY_ACCELERATED_SPEED` |3000 |Accelerated cursor speed |
|
||
|`MOUSEKEY_WHEEL_INITIAL_MOVEMENTS` |16 |Initial number of movements of the mouse wheel |
|
||
|`MOUSEKEY_WHEEL_BASE_MOVEMENTS` |32 |Maximum number of movements at which acceleration stops |
|
||
|`MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS`|48 |Accelerated wheel movements |
|
||
|`MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS`|8 |Decelerated wheel movements |
|
||
|
||
Tips:
|
||
|
||
* The smoothness of the cursor movement depends on the `MOUSEKEY_INTERVAL` setting. The shorter the interval is set the smoother the movement will be. Setting the value too low makes the cursor unresponsive. Lower settings are possible if the micro processor is fast enough. For example: At an interval of `8` milliseconds, `125` movements per second will be initiated. With a base speed of `1000` each movement will move the cursor by `8` pixels.
|
||
* Mouse wheel movements are implemented differently from cursor movements. While it's okay for the cursor to move multiple pixels at once for the mouse wheel this would lead to jerky movements. Instead, the mouse wheel operates at step size `1`. Setting mouse wheel speed is done by adjusting the number of wheel movements per second.
|
||
|
||
### Constant mode
|
||
|
||
In this mode you can define multiple different speeds for both the cursor and the mouse wheel. There is no acceleration. `KC_ACL0`, `KC_ACL1` and `KC_ACL2` change the cursor and scroll speed to their respective setting.
|
||
|
||
You can choose whether speed selection is momentary or tap-to-select:
|
||
|
||
* **Momentary:** The chosen speed is only active while you hold the respective key. When the key is raised, mouse keys returns to the unmodified speed.
|
||
* **Tap-to-select:** The chosen speed is activated when you press the respective key and remains active even after the key has been raised. The default speed is that of `KC_ACL1`. There is no unmodified speed.
|
||
|
||
The default speeds from slowest to fastest are as follows:
|
||
|
||
* **Momentary:** `KC_ACL0` < `KC_ACL1` < *unmodified* < `KC_ACL2`
|
||
* **Tap-to-select:** `KC_ACL0` < `KC_ACL1` < `KC_ACL2`
|
||
|
||
To use constant speed mode, you must at least define `MK_3_SPEED` in your keymap’s `config.h` file:
|
||
|
||
```c
|
||
#define MK_3_SPEED
|
||
```
|
||
|
||
To enable momentary mode, also define `MK_MOMENTARY_ACCEL`:
|
||
|
||
```c
|
||
#define MK_MOMENTARY_ACCEL
|
||
```
|
||
|
||
Use the following settings if you want to adjust cursor movement or scrolling:
|
||
|
||
|Define |Default |Description |
|
||
|---------------------|-------------|-------------------------------------------|
|
||
|`MK_3_SPEED` |*Not defined*|Enable constant cursor speeds |
|
||
|`MK_MOMENTARY_ACCEL` |*Not defined*|Enable momentary speed selection |
|
||
|`MK_C_OFFSET_UNMOD` |16 |Cursor offset per movement (unmodified) |
|
||
|`MK_C_INTERVAL_UNMOD`|16 |Time between cursor movements (unmodified) |
|
||
|`MK_C_OFFSET_0` |1 |Cursor offset per movement (`KC_ACL0`) |
|
||
|`MK_C_INTERVAL_0` |32 |Time between cursor movements (`KC_ACL0`) |
|
||
|`MK_C_OFFSET_1` |4 |Cursor offset per movement (`KC_ACL1`) |
|
||
|`MK_C_INTERVAL_1` |16 |Time between cursor movements (`KC_ACL1`) |
|
||
|`MK_C_OFFSET_2` |32 |Cursor offset per movement (`KC_ACL2`) |
|
||
|`MK_C_INTERVAL_2` |16 |Time between cursor movements (`KC_ACL2`) |
|
||
|`MK_W_OFFSET_UNMOD` |1 |Scroll steps per scroll action (unmodified)|
|
||
|`MK_W_INTERVAL_UNMOD`|40 |Time between scroll steps (unmodified) |
|
||
|`MK_W_OFFSET_0` |1 |Scroll steps per scroll action (`KC_ACL0`) |
|
||
|`MK_W_INTERVAL_0` |360 |Time between scroll steps (`KC_ACL0`) |
|
||
|`MK_W_OFFSET_1` |1 |Scroll steps per scroll action (`KC_ACL1`) |
|
||
|`MK_W_INTERVAL_1` |120 |Time between scroll steps (`KC_ACL1`) |
|
||
|`MK_W_OFFSET_2` |1 |Scroll steps per scroll action (`KC_ACL2`) |
|
||
|`MK_W_INTERVAL_2` |20 |Time between scroll steps (`KC_ACL2`) |
|
||
|
||
### Combined mode
|
||
|
||
This mode functions like **Accelerated** mode, however, you can hold `KC_ACL0`, `KC_ACL1` and `KC_ACL2`
|
||
to momentarily (while held) set the cursor and scroll speeds to constant speeds. When no acceleration
|
||
keys are held, this mode is identical to **Accelerated** mode, and can be modified using all of the
|
||
relevant settings.
|
||
|
||
* **KC_ACL0:** This acceleration sets your cursor to the slowest possible speed. This is useful for very
|
||
small and detailed movements of the cursor.
|
||
* **KC_ACL1:** This acceleration sets your cursor to half the maximum (user defined) speed.
|
||
* **KC_ACL2:** This acceleration sets your cursor to the maximum (computer defined) speed. This is
|
||
useful for moving the cursor large distances without much accuracy.
|
||
|
||
To use constant speed mode, you must at least define `MK_COMBINED` in your keymap’s `config.h` file:
|
||
|
||
```c
|
||
#define MK_COMBINED
|
||
```
|
||
|
||
## Use with PS/2 Mouse and Pointing Device
|
||
|
||
Mouse keys button state is shared with [PS/2 mouse](feature_ps2_mouse.md) and [pointing device](feature_pointing_device.md) so mouse keys button presses can be used for clicks and drags.
|