keychron_qmk_firmware/keyboards/ungodly/launch_pad/readme.md

Launch Pad

The guidance computer inside the Launch Pad by Ungodly Design.

Features:

• Onboard atmega32u4 controller, 5V @ 16MHz
• Kaihl hotswap sockets
• USB-C connector
• 18 in-switch RGB LEDs
• 4 underglow RGB LEDs
• 100 Ω potentiometer slider
• (optional) M2 pcb mounting holes
• (optional) pcb-mount stablizer footprints
• (optional) pin breakout:
  • F5, F4, F1, F0, VBUS, GND

PCB Front	PCB Back

Numpad Layout	5x4 Layout

• Keyboard Maintainer: Luis Godinez
• Hardware Supported: Launch Pad PCB
• Hardware Availability: Ungodly.Design

Make example for this keyboard (after setting up your build environment):

make ungodly/launch_pad:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Firmware

• v1.0

Reset Bootloader

Use tweezers to short the two bottom pins of the J-Link pinout.

Midi Setup

Windows	Mac
Midi Mixer Download the latest version of Midi Mixer Run the exe to install the application. Launch the MIDI Mixer application. Navigate to the "Profiles" tab and select the "Ungodly Design Launch Pad" preset. Navigate to the "Groups" tab and select the audio source you would like to control. Optionally, Navigate to the "Settings" tab and enable/disable "Logarithmic volume curve".	Midi2Lightroom ControllerMate

Custom OLED Displays

Layer	Graphic
home
nav
rgb

• These instructions require compiling your own firmware. Ensure that your build environenment is setup.
• Use QMK Logo Editor to create your own LCD graphics.
• Copy the generated output into your keymap (sample code)
  • Note: By default, the LCD is configured as a vertical display with a 180 degree rotation. You may need to change the OLED_ROTATION value in the keymap.c to achieve your desired effect.
• Compile the firmware and flash it to your launch pad.