mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-23 08:56:47 +06:00
1.4 KiB
1.4 KiB
converter/xmk
converter/xmk is the QMK keyboard definition for 𝑥MK.
- Keyboard Maintainer: Manna Harbour
- Hardware Supported: Any QMK-compatible MCU board
- Hardware Availability: No additional hardware required
Make example for this keyboard (after setting up your build environment):
make converter/xmk:default
Flashing example for this keyboard:
make converter/xmk:default:flash
To flash pre-compiled firmware to a pro-micro on Linux without using the qmk CLI:
avrdude -p atmega32u4 -c avr109 -U flash:w:converter_xmk_default.hex:i -P /dev/ttyACM0
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 4 ways:
- Boot shell command: Give the
bootcommand to theconverter/xmkshell, e.g.echo "boot" > /dev/ttyACM0 - Keycode in layout: Press the key mapped to
QK_BOOTif it is available - Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard