keychron_qmk_firmware/layouts/community/ergodox/issmirnov/README.md

Ivan's Ergodox Config

Details about the layout

• Shift and Cmd are One Shot Modifiers, so tapping them once will apply them to the next key. When tapped twice they will lock, until tapped again to clear.
• When switching to other layers, any stuck modifiers are cleared in order to avoid unintended key combos
• There are a few leader key combinations. Right now, QK_LEAD + s will open my wiki homepage.
• All transparent keys have been replaced with noops to avoid layer bleeding.

Initial Setup

QMK

brew tap osx-cross/avr
brew tap PX4/homebrew-px4
brew update
brew install avr-gcc
brew install dfu-programmer
brew install gcc-arm-none-eabi
brew install avrdude

git clone https://github.com/qmk/qmk_firmware.git
git clone https://github.com/issmirnov/ergodox-layout.git \
            layouts/community/ergodox/ismirnov

Teensy utils

Download and add both of these to $PATH

• hid_listen
• teensy loader cli

Flashing

make ergodox_ez:ismirnov
teensy_loader_cli -mmcu=atmega32u4 -w -v ergodox_ez_ismirnov.hex

# or just
make ergodox_ez:ismirnov:flash

Gotchas

• If you get error: dyld: Library not loaded: /usr/local/opt/isl/lib/libisl.15.dylib then do brew reinstall avr-gcc
• If hid_listen just prints out a ton of dots, update makefile with CONSOLE_ENABLE = yes