mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-30 04:37:14 +06:00
a9c6adb083
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
1.8 KiB
1.8 KiB
KMAC PAD
KMAC PAD is a num pad keyboard. It can be used independently, but can also be used by connecting with KMAC keyboard case.
- Keyboard Maintainer: talsu
- Hardware Supported: KMAC PAD
- Hardware Availability: http://www.kbdmania.net/xe/news/5232321
Make example for this keyboard (after setting up your build environment):
make kmac_pad:default
Flashing example for this keyboard:
make kmac_pad:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
The PCB is hardwired to run the bootloader if the key at the FN position (the only key in first row) is held down when connecting the keyboard.
PCB
Switch Pins
The FN key in the Row 0 is directly connected to the E2 pin.
The rest of the rows below that use MATRIX. (Row 1 ~ Row 5)
| Row | Pin |
|---|---|
| 0 | x (Not in Matrix) |
| 1 | D0 |
| 2 | D1 |
| 3 | D2 |
| 4 | D3 |
| 5 | D5 |
| Column | Pin |
|---|---|
| 0 | C7 |
| 1 | C6 |
| 2 | B6 |
| 3 | B5 |
Backlight Pins
There are 2 pins for backlight.
The LED of the FN key uses pin B3.
All other keys are connected to the B1 pin.