mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-27 11:38:58 +06:00
32 lines
1.5 KiB
Markdown
32 lines
1.5 KiB
Markdown
# Lulu
|
|
|
|
|
|
|
|
The lulu is what the ergo community has needed for a long time, a high-end aesthetic split ergo 60%. With this project we not only tried to create a beautiful product but we also wanted to unify the some what split 60% community. With hotswap, per key rgb & underglow, swappable encoder and adjustable tenting with out giving up anything.
|
|
|
|
|
|
* Keyboard Maintainer: [Boardsource](https://github.com/daysgobye)
|
|
* Hardware Supported: lulu v1
|
|
* Hardware Availability: this keyboard is available from the [Boardsource store](https://boardsource.xyz/store/61d0b772319a1f3cc53ba2fb)
|
|
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make boardsource/lulu/rp2040:default
|
|
make boardsource/lulu/avr:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make boardsource/lulu/rp2040:default:flash
|
|
make boardsource/lulu/avr:default:flash
|
|
|
|
|
|
Compile `rp2040` firmware if you purchased PCB in lulu group buy (integrated microcontroller).
|
|
Compile `avr` firmware if your PCB uses a drop-in microcontroller like Pro Micro.
|
|
|
|
|
|
Enter bootloader by holding down the upper outer key while you plug in the usb cable, or by pushing the reset switch on the pcb.
|
|
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|