mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-12 05:06:38 +06:00
1.2 KiB
1.2 KiB
Lunakey Pico
This is a 40% split keyboard which has 3x6 vertically staggered keys and 4 thumbnail keys.
- Keyboard Maintainer: Yoichiro Tanaka
- Hardware Supported: Lunakey Pico PCB, Raspberry Pi Pico MCU.
- Hardware Availability: https://booth.pm/ja/items/3324672
Make example for this keyboard (after setting up your build environment):
qmk compile -kb yoichiro/lunakey_pico -km default
Flashing example for this keyboard:
qmk flash -kb yoichiro/lunakey_pico -km default -bl avrdude
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
QK_BOOT
if it is available