mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-28 11:47:32 +06:00
7f413e9f01
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
37 lines
1.5 KiB
Markdown
37 lines
1.5 KiB
Markdown
# pi50
|
|
|
|
The pi40 is a 5x12 ortholinear keyboard with options for a 1u or 2u spacebar using a Raspberry Pi Pico for the controller.
|
|
|
|
It includes options for a rotary encoder, SSD1306 oled, and per-key in-switch RGB LEDs.
|
|
|
|
All unused GPIO pins are broken out on the main pcb, as well as the available voltage pins.
|
|
|
|
This firmware also includes the option for VIA which includes configuration options for the rotary encoder, matrix lighting, and up to 10 layers.
|
|
|
|
Default oled configuration displays:
|
|
- current layer
|
|
- caps lock status
|
|
- num lock status
|
|
- scroll lock status
|
|
- current RGB lighting mode
|
|
|
|
* Keyboard Maintainer: [ziptyze](https://github.com/ziptyze)
|
|
* Hardware Availability: (https://1upkeyboards.com/shop/keyboard-kits/diy-40-kits/pi50-keyboard-kit/#pcb-color)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make 1upkeyboards/pi50:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make 1upkeyboards/pi50:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 2 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix, the top left key, and plug in the keyboard
|
|
* **BOOTSEL button**: Hold down the BOOTSEL button on the pico, and plug in the keyboard
|