mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 09:27:36 +06:00
53 lines
1.4 KiB
Markdown
53 lines
1.4 KiB
Markdown
NerD keyboard firmware
|
|
========================
|
|
|
|
Korean Keyboard designed by GON.
|
|
|
|
*Note that this is not the official firmware*
|
|
|
|
|
|
Hardware revision
|
|
-----------------
|
|
|
|
This firmware was developed and tested for NerD pcb version 1.61 and 2.0.
|
|
|
|
|
|
Supported features
|
|
------------------
|
|
|
|
* All layout options are supported
|
|
* All leds are supported
|
|
* 60% and 80% (TKL) pcbs are supported
|
|
|
|
|
|
Changing Bootloader
|
|
-------------------
|
|
|
|
You can't simply just upload this firmware to a new NerD board because the original
|
|
bootloader won't accept DFU connections.
|
|
|
|
You can change the bootloader of the keyboard with an ISP programmer of your choice.
|
|
The bootloader pins are easy to access on the NerD pcb.
|
|
|
|
*Be aware that after changing the bootloader the official configuration software
|
|
won't work anymore and you'll lose your warrenty. GON won't provide any support for this firmware.*
|
|
|
|
|
|
Build
|
|
-----
|
|
|
|
For building you have to specify two build-options, LAYOUT and KEYMAP. The layout option defines
|
|
pcb layout and can be either 60% or 80% at the momemnt. The keymap option selects your
|
|
preferred keymapping.
|
|
|
|
Move to this directory then just run `make LAYOUT=60 KEYMAP=ansi150`
|
|
|
|
to compile a firmware for a 60% pcb with ANSI 150 key mapping.
|
|
|
|
|
|
Jump to Bootloader
|
|
------------------
|
|
|
|
You can jump to bootloader by software if you have a macro defined for this in your keymap. The
|
|
default command is (LSFT+RSFT+PAUS) to access the bootloader by software jump.
|