mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-30 21:38:01 +06:00
27 lines
1.0 KiB
Markdown
27 lines
1.0 KiB
Markdown
# FJLabs TF60 ANSI
|
|
|
|
The following is the QMK Firmware for the FJLabs TF60 ANSI PCB, a universal tray mount 60% hotswap PCB with per key RGB LED's.
|
|
|
|
The PCB will feature:
|
|
* Kailh Hotswap sockets
|
|
* QMK & VIA compatibility
|
|
* Per-Key RGB LED's
|
|
|
|
---
|
|
|
|
* Keyboard Maintainer: FJLabs
|
|
* Hardware Supported: TF60 ANSI
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make fjlabs/tf60ansi:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available |