mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-25 09:56:54 +06:00
9874d78da3
* Add mode 60 PCB's * Update Licenses * Unify Vendor name cross other projects * Move pin description from Config to Info.json * Replace WS2812 driver with PWM * Update keyboards/mode/m60h/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mode/m60h_f/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mode/m60h/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mode/m60s/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/mode/m60s/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Format info.json files * replace link with images * Fix spacings in Config file * remove non essential file * Update readme.md spacings * Update readme.md Spacings * Update readme.md --------- Co-authored-by: Wolf <contact@vwolf.be> Co-authored-by: Ryan <fauxpark@gmail.com>
25 lines
1.0 KiB
Markdown
25 lines
1.0 KiB
Markdown
# Mode Tempo M60S
|
|
|
|
|
|
|
|
The following is the QMK Firmware for the Mode Tempo M60S PCB.
|
|
|
|
* Keyboard Maintainer: [ToastyStoemp](https://github.com/ToastyStoemp)
|
|
* Hardware Supported: Mode Tempo M60S PCB.
|
|
* Hardware Availability: https://modedesigns.com/products/tempo
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make mode/m60s:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make mode/m60s:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader Enter the bootloader in 3 ways:
|
|
* **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch)
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if available
|
|
* **Physical Reset Button**: Hold down the button on the back of the PCB
|