mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-27 02:56:33 +06:00
e661f1559e
* Added basic MxSS support * Fixed split RSHFT for ISO layouts * Updated readme.md for MxSS * Added initial support for individual control of front RGB LEDs * Changed RGBLED color selection to work using hue and saturation rather than RGB Added code for LED state change on layer change * Avoid needing an entire 8 bits to store the brightness value * Added custom keycodes, along with their handlers * Added EEPROM storage for front LED config * Fixed up ability to use QMK Configurator and updated readme.md * Applied suggested changes from pull request: https://github.com/standard/standard/issues/452 Updated name in license descriptions Updated layouts to snake case Corrected mistakes in info.json Updated layer_colors to a weak attributed array in mxss.c * Defined a new safe range for custom keycodes in keymap.c
54 lines
2.0 KiB
Markdown
54 lines
2.0 KiB
Markdown
# MxSS - Polycarb 65% Kit for MX/SMK
|
|
|
|
|
|
|
|
### Information:
|
|
|
|
- Case: Frosted Polycarbonate, CNC milled
|
|
- Plate: Brass, mirror-finished and electroplated
|
|
- Weight: Same as plate
|
|
- PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish
|
|
|
|
### Details:
|
|
|
|
- 2.9 degrees angle on the case
|
|
- Top mount plate
|
|
- Center USB, Type-B Mini
|
|
- MX and SMK (White and Orange) switch support
|
|
- Holtite support
|
|
- RGB underglow
|
|
- 1.5kg with plate and weight
|
|
|
|
Keyboard Maintainer: [MxBlue](https://github.com/mxblu)
|
|
|
|
Hardware Supported: Custom PCB, ATMega32u4
|
|
|
|
Hardware Availability: https://geekhack.org/index.php?topic=94986.0
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make mxss:default
|
|
|
|
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
|
|
|
# Front LED Operation
|
|
|
|
The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes.
|
|
|
|
There are 3 modes of operation:
|
|
|
|
- FLED_OFF - Front LEDs stay off
|
|
- FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request)
|
|
- FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer
|
|
|
|
Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example).
|
|
|
|
## Custom Keycodes
|
|
|
|
- FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI)
|
|
- FLED_VAI - Increase front LED brightness
|
|
- FLED_VAD - Decrease front LED brightness
|
|
|
|
# Further Notes
|
|
|
|
As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example. |