mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-27 11:38:58 +06:00
Code Issues Packages Projects Releases Wiki Activity
3b9e186019
keychron_qmk_firmware/keyboards/ekow/akira/readme.md
Eugene-Yuan Kou a3e057e779
Adding akira (#16982) 
* keyboard:akira initial commit

* Update keyboards/ekow/akira/akira.h

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/ekow/akira/keymaps/via/rules.mk

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/ekow/akira/readme.md

Co-authored-by: Joel Challis <git@zvecr.com>

* Update .gitignore

Co-authored-by: Joel Challis <git@zvecr.com>

* Update readme.md

* Update keyboards/ekow/akira/rules.mk

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update rules.mk

remove redundant content.

* added keyboard/ekow/keymaps/via/keymap.c

* remove .ccls-cache

* add instructions of enter the bootloader

* add instructions of enter the bootloader

* modify ekow/akira:via

* Update keyboards/ekow/akira/readme.md

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/ekow/akira/keymaps/via/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2022-05-10 17:00:30 +01:00

1.0 KiB
Raw Blame History

AKIRA

  • Keyboard Maintainer: eugenepy
  • Hardware Supported: AKIRA pcb, both Hotswap and solderable.
  • Hardware Availability: Not yet on groupbuy

Build

Make example for this keyboard (after setting up your build environment):

make ekow/akira:default

Flashing example for this keyboard:

make ekow/akira:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short.
  • Keycode in layout: Press the key mapped to RESET if it is available