mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-29 04:39:26 +06:00
Code Issues Packages Projects Releases Wiki Activity
2eea2cdc46
keychron_qmk_firmware/keyboards/handwired/dactyl_tracer/readme.md
Duncan Sutherland ef214e6a3c
Add 'dactyl_tracer' keyboard (#20993) 
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2023-09-22 21:45:34 -07:00

1.5 KiB
Raw Blame History

Dactyl Tracer

DactylTracer

The Dactyl Tracer is a handwired, split bodied, concave key-well, columnar keyboard. Case design is similar to the Dactyl CC though overall design is closer to the Dactyl ManuForm. The Q and P keys are vertically offset, from A and ; keys respectively, to allow for easier actuation by third/ring finger.

  • Keyboard Maintainer: Michael Johns
  • Hardware Supported: Pro Micro controller, or clone of
  • Hardware Availability: Case Files

Make example for this keyboard (after setting up your build environment):

make handwired/dactyl_tracer:default

Flashing example for this keyboard:

make handwired/dactyl_tracer:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available