mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-12 21:25:33 +06:00
5428d922a5
* Add EC 23U PCB firmware * Moved from data driven row/col def to config def * Implemented proper LAYOUT_ changes * Removed unnecessary `.h` includes * Updated default thresholds * Added `DISCHARGE_TIME` Addition of a `DISCHARGE_TIME` time. This is to ensure that the ghost capacitor that is the row strobed for the ADC read, is fully drained and doesn't carry charges that deviates the readings. Tested on multiple hardware and confirmed working and improving the readings, both in terms of stability and consistency for baseline noise. * Update readme.md Added missing `cipulot/` in example commands. * Removal of `info.json` lines as suggested * Update to comply with `_kb` and `_user` separation * Update rules.mk
1.1 KiB
1.1 KiB
EC 23U
Open source numpad Electrostatic Capacitive PCB.
Make example for this keyboard (after setting up your build environment):
make cipulot/ec_23u:default
Flashing example for this keyboard:
make cipulot/ec_23u:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical Boot0 pins: Short the Boot0 pins on the back of the PCB while plugging in the keyboard
- Keycode in layout: Press the key mapped to
QK_BOOT
if it is available