mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 17:37:40 +06:00
f4e6af2dbe
Co-authored-by: jack <jack@pngu.org> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
53 lines
1.6 KiB
Markdown
53 lines
1.6 KiB
Markdown
# sdrakb00
|
|
|
|
|
|
|
|
11 keys hot-swap macropad with rotary encoder.
|
|
|
|
Macropad features:
|
|
- 11 hot-swap keys
|
|
- Rotary encoder with push button
|
|
- AtMega32U4 MCU
|
|
- Per-key RGB led for backlighting
|
|
- USB-C connector
|
|
- On PCB SPI header
|
|
- MCU reset button
|
|
- Switch mounting plate
|
|
- Power LED indicator
|
|
|
|
* Keyboard Maintainer: [Diego Andres Rabaioli](https://github.com/drabaioli)
|
|
* Hardware Supported: Pro Micro Atmega32u4 based macropad with 11 keys, RGB LED chain and rotary encoder
|
|
* Hardware Availability: [Get the gerbers and have fun building it your self ;)](https://github.com/drabaioli/SdraKb00)
|
|
|
|
Build SdraKb00 firmware:
|
|
|
|
make sdrakbs/sdrakb00:default
|
|
|
|
Flashing SdraKb00 firmware, execute:
|
|
|
|
make sdrakbs/sdrakb00:default:flash
|
|
|
|
Then press the reset button on the back side of the PCB.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Physical reset button** (preferred): Briefly press the button on the back of the PCB
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
|
|
## Default Keymap
|
|
|
|
### Base Layer (0)
|
|
- NumPad layout (1-9, 0)
|
|
- Encoder: Volume Up/Down
|
|
- Encoder Push: Mute
|
|
- Layer Switch: Hold (1,3) key for function layer
|
|
|
|
### Function Layer (1)
|
|
- NumPad operators (+, -, *, /)
|
|
- Enter, "=" and backspace keys
|
|
- Decimal point
|