mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-29 12:48:52 +06:00
c5f1e9797a
* change missed kprepublic readmes * fix xiudi readmes * initial change, see pr description * change readmes * changes names in readmes and device descriptors
50 lines
1.8 KiB
Markdown
50 lines
1.8 KiB
Markdown
# xd002
|
||
|
||
|
||
|
||
2% Custom mechanical keyboard. ATtiny85 powered, with 2*WS2812 LEDs, and the micronucleus bootloader.
|
||
|
||
**Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard.
|
||
|
||
* Keyboard Maintainer: [zvecr](https://github.com/zvecr)
|
||
* Hardware Supported: xd002
|
||
* Hardware Availability: [kprepublic](https://kprepublic.com/products/xd002-xiudi-2-custom-mechanical-keyboard-2-keys-underglow-and-switch-rgb-pcb-programmed-hot-swappable-macro-key-aluminum-case)
|
||
|
||
Make example for this keyboard (after setting up your build environment):
|
||
|
||
make xiudi/xd002:default
|
||
|
||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
||
## Flashing
|
||
### Prerequisites
|
||
|
||
```bash
|
||
git clone https://github.com/micronucleus/micronucleus.git
|
||
cd micronucleus/commandline/
|
||
sudo make install
|
||
```
|
||
|
||
On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following:
|
||
|
||
```bash
|
||
sudo udevadm control --reload-rules
|
||
sudo udevadm trigger
|
||
```
|
||
|
||
### Instructions
|
||
|
||
**Reset Key**: Hold down key nearest to the USB socket while plugging in the keyboard.
|
||
|
||
```bash
|
||
make xiudi/xd002:default:flash
|
||
|
||
# or directly with...
|
||
micronucleus --run <firmware.hex>
|
||
```
|
||
|
||
### Recovery
|
||
|
||
* [Original Firmware](https://github.com/xiudi/Attiny85_vusb_pad_test)
|
||
* [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp)
|