mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-26 19:18:03 +06:00
Code Issues Packages Projects Releases Wiki Activity
0cda2f43e2
keychron_qmk_firmware/docs/internals_gpio_control.md
Jack Humbert 15f6278aa6
Add support for Atmega32A to pin declarations and universal matrix (#4015) 
* add computed pins from mcu type

* update for atmega32a

* doc typo

* add atmega16 chips, link to references

* remove avr include from config

* exclude assembler in config.h includes

* consolodate options, add 646

* fix typo in pindef
2018-11-02 12:31:40 -04:00

1.6 KiB
Raw Blame History

GPIO Control

QMK has a GPIO control abstraction layer which is micro-controller agnostic. This is done to allow easy access to pin control across different platforms.

Functions

The following functions can provide basic control of GPIOs and are found in quantum/quantum.h.

Function Description
setPinInput(pin) Set pin as input with high impedance (High-Z)
setPinInputHigh(pin) Set pin as input with build in pull-up
setPinInputLow(pin) Set pin as input with build in pull-down (Supported only on STM32)
setPinOutput(pin) Set pin as output
writePinHigh(pin) Set pin level as high, assuming it is an output
writePinLow(pin) Set pin level as low, assuming it is an output
writePin(pin, level) Set pin level, assuming it is an output
readPin(pin) Returns the level of the pin

Advance settings

Each micro-controller can have multiple advance settings regarding its GPIO. This abstraction layer does not limit the use of architecture specific functions. Advance users should consult the datasheet of there desired device and include any needed libraries. For AVR the standard avr/io.h library is used and for STM32 the Chibios PAL library is used.