mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-25 01:47:10 +06:00
Code Issues Packages Projects Releases Wiki Activity
master
keychron_qmk_firmware/keyboards/zykrah/fuyu_hs/readme.md
Danny Tan 10849dac68
Add Fuyu HS (#24567) 
* Add Fuyu HS

* Fix keyboard.json linting

* Fix rgbmatrix configuration

* Apply suggestions from code review

Co-authored-by: Joel Challis <git@zvecr.com>

---------

Co-authored-by: Joel Challis <git@zvecr.com>
2024-11-08 21:23:31 -07:00

1.3 KiB
Raw Permalink Blame History

FUYU HOTSWAP

FUYU HS 7U

An F12 TKL Hotswappable H87-Compat Type-C PCB for the Geon F1-8K

Make example for this keyboard (after setting up your build environment):

make zykrah/fuyu_hs:default

Flashing example for this keyboard:

make zykrah/fuyu_hs:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly short the RST and GND pads on the SWD header twice, or short the BOOT header and plug in keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available