mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-25 01:47:10 +06:00
Code Issues Packages Projects Releases Wiki Activity
master
keychron_qmk_firmware/keyboards/takashicompany/ejectix/readme.md
takashicompany 0a03fc512c
[Keyboard] Add Ejectix (#23204) 
Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2024-03-08 02:51:37 -08:00

1.7 KiB
Raw Permalink Blame History

Ejectix

takashicompany/ejectix

Ejectix is a 36-key, low-staggered keyboard.
Its layout is similar to that of a conventional keyboard, making it suitable for an introductory keyboard of 30% size.
Its relatively simple structure makes it easy to assemble, and it is recommended for those who are just starting to build their own keyboards.
Since the firmware is VIA-compatible, it is possible to write the firmware and change the keymap from a web browser by using Remap.
The MX socket is also supported, making it easy to replace the keyswitch for long-lasting use.
Underglow LEDs can also be used to decorate your desk.

Make example for this keyboard (after setting up your build environment):

make takashicompany/ejectix:default

Flashing example for this keyboard:

make takashicompany/ejectix:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available