mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-25 09:56:54 +06:00
e423d5e3d4
Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
32 lines
1.5 KiB
Markdown
32 lines
1.5 KiB
Markdown
# Baumkuchen
|
|
|
|
|
|
|
|
Baumkuchen is a 13-key macropad with a radial key layout.
|
|
The board can be used as a circuit or as a switch plate by cutting out the keyswitch Pro Micro part.
|
|
It is compatible with Cherry MX compatible keyswitches, and a rotary encoder can be optionally installed.
|
|
LEDs can also be mounted to make it glow.
|
|
The board is reversible, allowing you to choose the arrangement of keys and Pro Micro according to your usage style.
|
|
|
|
* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
|
|
* Hardware Supported: Baumkuchen PCB, Pro Micro
|
|
* Hardware Availability: https://github.com/takashicompany/baumkuchen
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make takashicompany/baumkuchen:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make takashicompany/baumkuchen:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|