pluto12

The pluto12 is a 4x3 macropad designed for use in the Penn State IEEE Student Chapter's 2021-22 workshop series. Designed by the 2021-22 Penn State IEEE Projects Committee.

Keyboard Maintainer: Will McGloughlin
Hardware Supported: Pro Micro and derivatives
Hardware Availability: PCB and case files

Make example for this keyboard (after setting up your build environment):

make psuieee/pluto12:default

Flashing example for this keyboard:

make psuieee/pluto12:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead.
Keycode in layout: Press the key mapped to QK_BOOT if it is available

1.3 KiB Raw Permalink Blame History

pluto12

Bootloader

1.3 KiB

Raw Permalink Blame History