mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-22 00:16:41 +06:00
23a8f7f03b
* ADD Keyboard * Resolved requested changes * update keymap.c file * resolved requested changes * updated info.json file * Updated requested changes * Delete JK01.h file * Resolved requested changes * Delete readme.md * add rules.mk to default folder * Upload default/keymap.c * Add via/keymap.c * Updated info.Json file * Change VID in info.json * Resolved requested changes * Resolved requested changes. * Resolved requested changes * Updated changes --------- Co-authored-by: gksygithub <gskyGit@gsky.com.tw>
24 lines
992 B
Markdown
24 lines
992 B
Markdown
# jk01
|
|
|
|
An 83 keys keyboard, Equipped with the WestBerry Q95 microcontroller.
|
|
|
|
* Keyboard Maintainer: [JUKAIE](https://github.com/jukaie)
|
|
* Hardware Supported: JK01
|
|
* Hardware Availability: [JUKAIE](https://github.com/jukaie/keyboard1)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make jukaie/jk01:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make jukaie/jk01:default:flash
|
|
|
|
To reset the board into bootloader mode, do one of the following:
|
|
|
|
* Hold the Reset switch mounted on the surface of the PCB back side after the USB cable is connected
|
|
* Hold the Escape key while connecting the USB cable (also erases persistent settings)
|
|
* Fn+ESC will reset the board to bootloader mode
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|