mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-22 00:16:41 +06:00
Code Issues Packages Projects Releases Wiki Activity
master
keychron_qmk_firmware/keyboards/handwired/marek128b/ergosplit44/readme.md
Marek128b 1c68cd09b8
[Keyboard] add ergosplit44 v1 (#22344) 
Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com>
Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2023-12-12 00:48:59 -08:00

1.2 KiB
Raw Permalink Blame History

ergosplit44

ergosplit44

This is a handdwired split 44 key keyboard. the two sides are connectd via a custom 2x8P pin header cable.

  • Keyboard Maintainer: Marek128b
  • Hardware Supported: WaveShare RP2040-Zero
  • Hardware Availability: Open Source

Make example for this keyboard (after setting up your build environment):

make handwired/marek128b/ergosplit44:default

Flashing example for this keyboard:

make handwired/marek128b/ergosplit44:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top left key and plug in the keyboard.
  • Physical reset button: Hold down the BOOT button on the RP2040-Zero, then press the RESET button.
  • Keycode in layout: There is no key mapped to QK_BOOT in the pre-created keymaps, but you may assign this key in any keymaps you create.