mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-22 00:16:41 +06:00
Code Issues Packages Projects Releases Wiki Activity
master
keychron_qmk_firmware/keyboards/hackpad/readme.md
ThePurox 01920b234a
[Keyboard] Add hackpad (#20402) 
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nico Stuhlmueller <n+git@ncxst.de>
Co-authored-by: jack <0x6a73@protonmail.com>
2023-07-04 11:21:10 -06:00

1.6 KiB
Raw Permalink Blame History

hackpad

hackpad

The Hackpad is a 4x4 numpad/macropad designed for the Arduino Day 2023 in Bayreuth in cooperation with the hackspace Imaginärraum e.V. and Fablab-Bayreuth e.V.. It supports 16 MX-style switches, an EC-11 rotary encoder, and per key RGB LEDs based on SK6812.

In v0.2 all necessary components are through hole components (except for an optional reset switch and RGB-LEDs), but the ProMicro protrudes out of the case. In v0.3 this is fixed by moving some diodes to the bottom side. The bottom diodes however are SMD only.

  • Keyboard Maintainer: Nico Stuhlmueller
  • Hardware Supported: ProMicro is supported in v0.2 and v0.3 of the PCBs
  • Hardware Availability: PCBs can be found here

Make example for this keyboard (after setting up your build environment):

make hackpad:default

Flashing example for this keyboard:

make hackpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 2 ways:

  • Physical reset button: Briefly press the button on the top of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available