* [Keymap] Add vitoni layout for GMMK Pro (ISO)
Keymap has layered cursor keys similar to laptop keyboards.
* Configure RGB defaults for startup
* Configure encoder to change value/brightness on FN layer
* Remove FN layer and add dedicated RGB layer
* Make RGB layer sticky (using TG) to avoid holding FN while configuring RGB
* Add RGB indicators for active layers
* Add RGB indicator for active RESET mode
Signed-off-by: Victor Toni <victor.toni@gmail.com>
* Configure idle / USB suspend settings
* Add RGB fade in when resuming after suspend
* Add RGB fade out before suspend
* Add fade out before idle
* Add breathe effect when idle
* Add script to build all bcat keymaps at once
* Move userspace RGB to separate source file
* Move layer handling logic into userspace
* Move keycap aliases into userspace
* Add OLED userspace library and Lily58 OLED setup
* Add Luna keyboard pet, generic OLED pet framework
Luna artwork and original implementation by HellSingCoder, licensed
under GPL v2.0.
See also: 6dfe915e26/keyboards/sofle/keymaps/helltm/keymap.c
* Use OLED on bcat's Crkbd
I had to turn off a few unused features to address firmware size limits.
* Remove vestigial NK_TOGG keybindings
* Add post-render hook to OLED pet API
This enables OLED pets to draw custom widgets (e.g., LED indicator
status) on top of their animation frames.
* Add Isda keyboard pet
For future use on my Unicorne keyboard. Unicorn artwork by sparrow666,
licensed under GPL v2.0.
See also: https://opengameart.org/content/unicorn-2
* Replace OLED timeout implementation with custom
The default implementation never lets the OLED turn off if a continuous
animation is in progress. The custom one does.
* Move keyboard state for OLED functions into struct
No change in firmware size, but makes keymaps read a little nicer and
enables more functionality in OLED pets.
* Enable continuously running OLED pet (for Luna)
* Sync OLED state; enable Bootmagic only when needed
The new extensible split transport for Split Common finally allows OLED
on/off status to be synced between halves of the keyboard. :)
Unfortunately, this required disabling Bootmagic Lite to keep my Crkbd
under the firmware size limit. (I now after 28 bytes free on avr-gcc
version 8.5.0.) So now I'll enable Bootmagic only on keyboards that
actually require it, i.e., ones lacking an accessible reset button.
* Update 9-Key macropad keymap for working from home
* Remove includes redundant with quantum.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Simplify BCAT_OLED_PET makefile logic
* Swap some keys on my 9-Key macropad around
* Inline spurious variable in OLED code
* Remove max brightness that's now set by default
The default max brightness is only 120 rather than 150, but that might
actually fix some weirdness I've seen with bright white LED settings.
* Enable specific RGBLIGHT modes instead of default
The general trend these days seems to be enabling only the modes you
want, so I'm manually expanding the ones currently enabled by
RGBLIGHT_ANIMATIONS.
I'd like to try out the TWINKLE mode too, but it seems not to work at
all on ARM right now, and all my usable RGBLIGHT keebs are ARM boards.
* Reenable RGB_MATRIX animations after #15018
My Crkbd still has a reasonable amount of free space with these:
27974/28672 (97%, 698 bytes free). The RGB_MATRIX_KEYPRESSES effects
would put it over the firmware size limit, but I really don't ever use
those anyway.
* Use new get_u8_str function for WPM display
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Added accent.
* Added keymap for 5x6 dactyl manuform on KOY layout
* Added xd75 folder that is not in the main repo anymore?
* Added keymap for naked48 on KOY layout
* Added keymap for splitreus62 on KOY layout
* Added keymap for Dactyl Manuform 4x6 with RGB LEDs and K.O,Y layout
* Fixed error where handedness was not correctly determined because of combining vbus pins of both controllers.
* Replaced dynamic macros bith backspace and delete.
* Changed detecting handedness from detecting usb communication to checking a wired pin. This avoids problems when booting the PC, where VBUS is already high, but no communication is happening -> both halves think they are not master.
* Update keyboards/handwired/dactyl_manuform/4x6/keymaps/scheiklp/rules.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/naked48/keymaps/scheiklp/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/naked48/keymaps/scheiklp/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/naked48/keymaps/scheiklp/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keymap.c
Added copyright
* Update config.h
* Update rules.mk
* Updated files according to PR requests.
* Update keyboards/xd75/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/xd75/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/xd75/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/xd75/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Removed duplicate code. Updated copyright info.
* Restored readme
Co-authored-by: Drashna Jaelre <drashna@live.com>
* remove macroMode functionality
* update kbdfans/kbd75/rev1:noroadsleft keymap
- replace `_______` instances with `XXXXXXX` on System layer
- add line breaks between keymap layers
* Tidy up LCD_ENABLE/visualizer references
* Fix up my (333fred) ergodox keymap with new LCD driver
Co-authored-by: Fredric Silberberg <fred@silberberg.xyz>
* Fix issues with user split transport code
* Improve OLED (More font stuff, improved keylogger, etc)
* Add `KEYLOCK` macro to disable USB, borrowed from command feature.
* Convert Kyria fully to proton C (no more AVR kyria)
* Add Work Louder Work Board keymap
* Fill the oleds with right mods
* Enable double mods on x32 oleds
* Disable forced NKRO
* Make oleds fancy only on good MCUs
* Overhaul oled display
* Further enhance oled, with kitty!
* Final oled form
* Not working transport
* Transport id of woring
* Add acceleration
* fix button placement for accel macro
* Fix accelartion location and behavior
* Remove OLED sync code
* Fix alignment issue
* Remove audio hack
* Fix up zima keymap
* Add matrix slave scan function and cleanup drashna.h
* Clean up user space
* Allow userspace sync to be disable-able
* Fix weird issue with audio
* Fix alignment issue with user split sync
* Disable second rgb matrix task
* Disable additional animations
* Change dynamic keymap settings
* Hacky fix for borked corne
* Add Blackpill (F411) support to tractyl manuform
* remove manual via eeprom reset
* Remove all references to rgblight twinkle
* Fix issues with config processing
- Remove disused dz60/jdelkins_ss keymap
- Manage configured features for firmware size
- Improve build configuration for the secrets feature
- Various keymap tweaks
- Clean up formatting in various places
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
Fix reddit link
Duplicate open parenthesis next to close parenthesis on NSSL
Add customisation instructions
Add lily58
Add gergo
Co-authored-by: Jonathan Dayton <jonathandayton23@gmail.com>
Clean up LAYOUT macro formatting
Add alternative vi-style navigation layout
Add kyria
Add minidox
Change order of keyboards
Add iris
Expand TOC
Re-order userspace subheadings
Add atreus
Add customisation section
Add split_3x5_3 and split_3x6_3 layouts
Add for_science
Fix wrong paths in keyboard config.h and keymap.c headings
Fix keyboard ordering
Fix blank lines around headings
Add compatibility with new org-mode version.
Remove keyboards/crkbd now covered by layouts/split_3x6_3
Add Halmak
Alphabetise alternative alpha arrangements
Move build options out of base layer alphas headings
Add list of keyboards supporting split_3x5_3 layout
Enable Auto Shift and Retro Shift
Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)
Change kyria thumb key mapping
Add planck_mit layout
Remove alternative bottom row support from ortho_4x12
Remove minidox
- Covered by split_3x5_3 layout
Add moonlander
Remove KC_ macros
Add 60_ansi layout
Add ortho_5x15 layout
Closesmanna-harbour/qmk_firmware#5
Co-authored-by: Rob <rob@debank.tv>
Fix typo (manna-harbour/qmk_firmware#7)
Author: sonnius <sonnius@users.noreply.github.com>
Add redox_w (manna-harbour/qmk_firmware#8)
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>
Add AUTO_SHIFT_NO_SETUP to reduce firmware size
Update image paths
Add instructions to checkout development branch
Add kyria extended thumbs option, change default, add KLE
Change clipboard keys
- Change order to be mirror of windows bindings
- Change default to use CUA bindings for Cut, Copy, and Paste, and Fun Cluster
bindings for Undo and Redo
- Add alternative bindings
- Fun Cluster (original miryoku bindings)
- Mac
- Windows
- Change prefix for local macros from X_ to U_
Disable Retro Shift, enable Auto Shift for non-alphas
Revert "Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)"
Add Experimental Features section
Update miryoku image link
Update cover image link
Add dactyl_manuform/4x5
Add cutomisation examples
Add https to remote example
Fix dactyl_manuform/4x5 subset mapping
Add extended thumbs to ortho_4x12
Update Colemak Mod-DH naming
Closesmanna-harbour/qmk_firmware#13
Add dactyl_manuform/5x6
Resolvesmanna-harbour/qmk_firmware#14
Co-authored-by: Sebastian Morales <sebastian.moralesd@gmail.com>
Add note on FORCE_LAYOUT
- Needed to use EXTENDED_THUMBS on planck
Add parent directories to keyboard headings and re-order
Add keyboardio/atreus
Resolvesmanna-harbour/qmk_firmware#15
Add torn
Resolvesmanna-harbour/qmk_firmware#16
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>
Change map to zip
- Adds support for python3, still compatible with python2.
Resolvesmanna-harbour/qmk_firmware#10Resolvesmanna-harbour/qmk_firmware#19
Co-authored-by: Ori <ori@oribarbut.com>
Add python-version
Add sofle
Add ergotravel
Add ortho_5x12
Add ortho_4x10
Add :main no header argument to C code blocks
resolvesmanna-harbour/qmk_firmware#11resolvesmanna-harbour/qmk_firmware#12
Co-authored-by: RubioJr9 <u0893472@utah.edu>
Add flipped layers and inverted-T nav alternative layouts
- Separate tap_table into alphas_table and thumbs_table
- Add mode argument to table-layout-half
- Remove layer_name
- Rename layers
- Add mods and clipboard to MBO and mirror
- Add MIRYOKU_LAYERS=FLIP
- Add MIRYOKU_NAV=INVERTEDT
Add layer diagrams
Update contact section
Update links for Bilateral Combinations and Retro Shift
Add description and no reverse angle option to 60_ansi layout
Update list of keyboards supporting community layouts
- and example build command lines
Change moonlander thumb keys
Update list of keyboards supporting split_3x5_3
Add license to tangled C source files
* [Keymap] merge jdelkins userspace and associated keymaps
* Add copyright & license info
* Change rgblight_config.enable to rgblight_is_enabled()
* Update keyboards/dz60/keymaps/jdelkins/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/dz60/keymaps/jdelkins/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/dz60/keymaps/jdelkins/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Remove superfluous includes
* Change EXTRAFLAGS+=-flto to LTO_ENABLE=yes
* Remove unnecessary jdelkins_ss symlink in users
* Add copyright and license notices
* Use preferred way to determine capslock / numlock state
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add #pragma once to a header
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Include QMK_KEYBOARD_H only once, in userspace header
* Remove unnecessary initialization in matrix_init_keymap
* Do process_record_keymap before cases handled in process_record_user
* Reorganize & simplify secrets feature enablement
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove superfluous break
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* include "print.h" instead of <print.h>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_cod16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* add #pragma once to a header
Co-authored-by: Ryan <fauxpark@gmail.com>
* include "print.h" instead of <print.h>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use :flash target where possible
* Remove special case flash target and use PROGRAM_CMD
* dz60/jdelkins_ss: use tap_code16
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Per Key functionality for AutoShift (#11536)
* LED Matrix: Reactive effect buffers & advanced indicators (#12588)
* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)
* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)
* LED Matrix: Split (#12633)
* [CI] Format code according to conventions (#12650)
* feat: infinite timeout for leader key (#6580)
* feat: implement leader_no_timeout logic
* docs(leader_key): infinite leader timeout docs
* Format code according to conventions (#12680)
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)
* Add support for MCU = STM32F446 (#12619)
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
* Format code according to conventions (#12682)
* Format code according to conventions (#12687)
* Add STM32L433 and L443 support (#12063)
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
* Include L443 in compatible microcontrollers
* Update config bootloader jump description
* Update ChibiOS define reasoning
* Update quantum/mcu_selection.mk
* fix git conflict
* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)
* Fix bad PR merge for #6580. (#12721)
* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)
* [CI] Format code according to conventions (#12731)
* Fixing transport's led/rgb matrix suspend state logic (#12770)
* [CI] Format code according to conventions (#12772)
* Fix comment parsing (#12750)
* Added OLED fade out support (#12086)
* fix some references to bin/qmk that slipped in (#12832)
* Resolve a number of warnings in `qmk generate-api` (#12833)
* New command: qmk console (#12828)
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
* Remove pointless SERIAL_LINK_ENABLE rules (#12846)
* Make Swap Hands use PROGMEM (#12284)
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* Fix another bin/qmk reference (#12856)
* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)
* Fixup build errors on `develop` branch. (#12723)
* LED Matrix: Effects! (#12651)
* Fix syntax error when compiling for ARM (#12866)
* Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)
* Rename `point_t` -> `led_point_t` (#12864)
* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)
* Add missing LED Matrix suspend code to suspend.c (#12878)
* LED Matrix: Documentation (#12685)
* Deprecate `send_unicode_hex_string()` (#12602)
* Fix spelling mistake regarding LED Matrix in split_common. (#12888)
* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)
* Use milc.subcommand.config instead of qmk.cli.config (#12915)
* Use milc.subcommand.config instead
* pyformat
* remove the config test
* Add function to allow repeated blinking of one layer (#12237)
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
* Fixup housekeeping from being invoked twice per loop. (#12933)
* matrix: wait for row signal to go HIGH for every row (#12945)
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* ensure we do not conflict with existing keymap aliases (#12976)
* Add support for up to 4 IS31FL3733 drivers (#12342)
* Convert Encoder callbacks to be boolean functions (#12805)
* [Keyboard] Fix Terrazzo build failure (#12977)
* Do not hard set config in CPTC files (#11864)
* [Keyboard] Corne - Remove legacy revision support (#12226)
* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)
* Add Full-duplex serial driver for ARM boards (#9842)
* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)
* Backlight: add defines for default level and breathing state (#12560)
* Add dire message about LUFA mass storage bootloader (#13014)
* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)
Was causing compiler errors on some systems.
* Fix keyboards/keymaps for boolean encoder callback changes (#12985)
* `backlight.c`: include `eeprom.h` (#13024)
* Add changelog for 2021-05-29 Breaking Changes merge (#12939)
* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version
* Add recent develop changes
* Sort recent develop changes
* Remove sections for ChibiOS changes per tzarc
No ChibiOS changes this round.
* Add and sort recent develop changes
* add notes about keyboard moves/deletions
* import changelog for PR 12172
Documents the change to BOOTMAGIC_ENABLE.
* update section headings
* re-sort changelog
* add additional note regarding Bootmagic changes
* remove changelog timestamp
* update dates in main Breaking Changes docs
* fix broken section anchors in previous changelogs
* add link to backlight/eeprom patch to changelog
* highlight some more changes
* link PRs from section headers
* Restore standard readme
* run: qmk cformat --core-only
* update for LTO and guard RGBLED_SPLIT
* Revert "update for LTO and guard RGBLED_SPLIT"
This reverts commit ce81177cbe330ae3e1e14c264dc0cb0946f08d70.
* Revert "Revert "update for LTO and guard RGBLED_SPLIT""
This reverts commit 67da0ce9f38777064ad094c1ecba7ce17a40994f.
* update iris keymap for keymap_kc removal and overhaul userspace
* add licenses
* fix tap_dance error when rgblight is disabled and update/clean iris/sinc maps
* Set Dvorak as the standard base layer
* Remove unneeded includes
* Remove custom handling for Quake 2
Have now rewritten my in-game configuration to use Dvorak mapping instead of QWERTY, which means I don't need any of this stuff.
* Clean up comments in KC60 keymap
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback
changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms
this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard)
f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both
-> only the changes on audio_arm_.*, the keyboard related parts are split off to a separate commit
bfe468ef1 start morphing wavetable
474d100b5 refined a bit
208bee10f play_notes working
3e6478b0b start in-place documentation of dac settings
3e1826a33 fixed blip (rounding error), other waves, added key selection (left/right)
73853d651 5 voices at 44.1khz
dfb401b95 limit voices to working number
9632b3379 configuration for the ez
6241f3f3b notes working in a new way
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback
changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms
this commit splits off the plank example keymap from commit
f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both
* refactoring: rename audio_ to reflect their supported hardware-platform and audio-generation method: avr vs arm, and pwm vs dac
* refactoring: deducplicate ISR code to update the pwm duty-cycle and period in the avr-pwm-implementation
pulls three copies of the same code into one function
which should improve readability and maintainability :-)
* refactoring: move common code of arm and avr implementation into a separate/new file
* refactoring: audio_avr_pwm, renaming defines to decouple them from actually used timers, registers and ISRs
* refactoring: audio_avr_pwm - replacing function defines with plain register defines
aligns better with other existing qmk code (and the new audio_arm_pwm) doing similar pwm thing
* add audio-arm-pwm
since not all STM32 have a DAC onboard (STM32F2xx and STM32F3xx), pwm-audio is an alternative (STM32F1xx)
this code works on a "BluePill" clone, with an STM32F103C8B
* clang-format changes on quantum/audio/* only
* audio_arm_dac: stopping the notes caused screeching when using the DAC audio paths
* audio_arm_pwm: use pushpull on the pin; so that a piezzo can be hooked up direclty without additional components (opendrain would require an external pullup)
* refactoring: remove unused file from/for atmel-avr chips
* refactoring: remove unused (avr) wavetable file
* audio_arm_dac: adapt dac_end callback to changed chibios DAC api
the previous chibios (17.6.0) passed along a pointer into the buffer plus a sample_count (which are/already where included in the DACDrivre object) - the current chibios (19.1.0) only passes the driver object.
this patch ports more or less exactly what the previous chibios ISR code did: either have the user-callback work the first or second half of the buffer (dacsample_t pointer, with half the DAC_BUFFER_SIZE samples) by adjusting the pointer and sample count
* audio-arm-dac: show a compile-warning on undefined audio-pins
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* audio_arm_dac: switch from exemplary wavetable generation to sine only
sine+triangle+squrare is exemplary, and not realy fit for "production" use
'stairs' are usefull for debugging (hardware, with an oscilloscope)
* audio_arm_dac: enable output buffers in the STM32
to drive external loads without any additional ciruitry - external opamps and such
* audio: prevent out-of-bounds array access
* audio_arm_dac: add output-frequency correcting factor
* audio_arm_pwm: get both the alternate-function and pm-callback variants back into working condition
and do some code-cleanup, refine documentation, ...
* audio_arm_pwm: increase pwm frequency for "higher fidelity"
on the previous .frequency=100000 higher frequency musical notes came out wrong
(frequency measured on a Tektronix TDS2014B)
note | freq | arm-pwm
C2 | 65.4 | 65.491
C5 | 523.25 | 523.93
C6 | 1046.5 | 1053.38
C7 | 2093 | 2129
C8 | 4186 | 4350.91
with .frequency = 500000
C8 | 4186 | 4204.6
* audio refactoring: remove unused variables
* audio_arm_dac: calibrate note tempo: with a tempo of 60beats-per-second a whole-note should last for exactly one second
* audio: allow feature selection in rules.mk
so the user can switch the audio driver between DAC and PWM on STM32 boards which support both (STM32F2 and up)
or select the "pin alternate" pwm mode, for example on STM32F103
* audio-refactoring: move codeblocks in audio.[ch] into more coherent groups
and add some inline documentation
* audio-refactoring: cleanup and streamline common code between audio_arm_[dac|pwm]
untangeling the relation between audio.c and the two drivers
and adding more documenting comments :-)
* audio_avr_pwm: getting it back into working condition, and cleanup+refactor
* audio-refactoring: documentation and typo fixes
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* audio-refactoring: cleanup defines, inludes and remove debug-prints
* audio_chibios_dac: define&use a minimal sampling rate, based on the available tone-range
to ease up on the cpu-load, while still rendering the higher notes/tones sufficiently
also reenable the lower tones, since with the new implementation there is no evidence of them still beeing 'bugged'
* audio-refactoring: one common AUDIO_MAX_VOICES define for all audio-drivers
* audio-chibios-pwm: pwm-pin-allternate: make the the timer, timer-channel and alternate function user-#definable
* audio_chibios_dac: math.h has fmod for this
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback
update Jack Humberts dac-example keymaps for the slight changes in the audio-dac interface
* audio-refactoring: use a common AUDIO_PIN configuration switch instead of defines
have the user select a pin by configuration in rules.mk instead of a define in config.h
has the advantage of beeing in a common form/pattern across all audio-driver implementations
* audio-refactoring: switch backlight_avr.c to the new AUDIO_PIN defines
* audio-common: have advance_note return a boolean if the note changed, to the next one in the melody beeing played
* audio-chibios-pwm: fix issue with ~130ms silence between note/frequency changes while playing a SONG
through trial,error and a scope/logic analyzer figured out Chibios-PWMDriver (at least in the current version) misbehaves if the initial period is set to zero (or one; two seems to work); when thats the case subsequent calls to 'pwmChhangePeriod' + pwmEnableChannel took ~135ms of silence, before the PWM continued with the new frequency...
* audio-refactoring: get 'play_note' working again
with a limited number of available voices (say AUDIO_VOICES_MAX=1) allow new frequencies to be played, by discarding the oldest one in the 'frequencies' queue
* audio: set the fallback driver to DAC for chibios and PWM for all others (==avr at the moment)
* audio-refactoring: moore documentation
and some cleanup
* audio-avr-pwm: no fallback on unset AUDIO_PIN
this seems to be the expected behaviour by some keyboards (looking at ckeys/handwire_101:default) which otherwise fail to build because the firmware-image ends up beeing too large for the atmega... so we fail silently instead to keep travis happy
* audio-refactoring: untangling terminology: voice->tone
the code actually was working on tones (combination of pitch/frequency, duration, timbre, intensity/volume) and not voices (characteristic sound of an instrument; think piano vs guitar, which can be played together, each having its own "track" = voice on a music sheet)
* audio-pwm: allow freq=0 aka a pause/rest in a SONG
continue processing, but do not enable pwm units, since freq=0 wouldn't produce any sound anyway (and lead to division by zero on that occasion)
* audio-refactoring: audio_advance_note -> audio_advance_state
since it does not only affect 'one note', but the internally kept state as a whole
* audio-refactoring: untangling terminology: polyphony
the feature om the "inherited" avr code has little to do with polyphony (see wikipedia), but is more a time-multiplexing feature, to work around hardware limitations - like only having one pwm channel, that could on its own only reproduce one voice/instrument at a time
* audio-chibios-dac: add zero-crossing feature
have tones only change/stop when the waveform approaches zero - to avoid audible clicks
note that this also requires the samples to start at zero, since the internally kept index into the samples is reset to zero too
* audio-refactoring: feature: time-multiplexing of tones on a single output channel
this feature was in the original avr-pwm implementation misnomed as "polyphony"
with polyphony_rate and so on; did the same thing though: time-multiplexing multiple active notes so that a single output channel could reproduce more than one note at a time (which is not the same as a polyphony - see wikipedia :-) )
* audio-avr-pwm: get music-mode working (again) on AVRs
with both pwm channels, or either one of the two :-)
play_notes worked already - but music_mode uses play_note
* audio-refactoring: split define MAX_SIMULTANEOUS_TONES -> TONE_STACKSIZE
since the two cases are independant from one another, the hardware might impose limitations on the number of simultaneously reproducable tones, but the audio state should be able to track an unrelated number of notes recently started by play_note
* audio-arm-dac: per define selectable sample-luts
plus generation script in ./util
* audio-refactoring: heh, avr has a MIN...
* audio-refactoring: add basic dac audio-driver based on the current/master implementation
whereas current=d96380e65496912e0f68e6531565f4b45efd1623
which is the state of things before this whole audio-refactoring branch
boiled down to interface with the refactored audio system = removing all
redundant state-managing and frequency calculation
* audio-refactoring: rename audio-drivers to driver_$PLATFORM_$DRIVER
* audio-arm-pwm: split the software/hardware implementations into separate files
which saves us partially from a 'define hell', with the tradeoff that now two somewhat similar chibios_pwm implementations have to be maintained
* audio-refactoring: update documentation
* audio-arm-dac: apply AUDIO_PIN defines to driver_chibios_dac_basic
* audio-arm-dac: dac_additive: stop the hardware when the last sample completed
the audio system calls for a driver_stop, which is delayed until the current sample conversion finishes
* audio-refactoring: make function-namespace consistent
- all (public) audio functions start with audio_
- also refactoring play*_notes/tones to play*_melody, to visually distance it a bit from play*_tone/_note
* audio-refactoring: consistent define namespace: DAC_ -> AUDIO_DAC_
* audio-arm-dac: update (inline) documentation regarding MAX for sample values
* audio-chibios-dac: remove zero-crossing feature
didn't quite work as intended anyway, and stopping the hardware on close-to-zero seems to be enought anyway
* audio-arm-dac: dac_basic: respect the configured sample-rate
* audio-arm-pwm: have 'note_timbre' influence the pwm-duty cycle
like it already does in the avr implementation
* audio-refactoring: get VIBRATO working (again)
with all drivers (verified with chibios_[dac|pwm])
* audio-arm-dac: zero-crossing feature (Mk II)
wait for the generated waveform to approach 'zero' before either turning off the output+timer or switching to the current set of active_tones
* audio-refactoring: re-add note-resting -> introduce short_rest inbetween
- introduce a short pause/rest between two notes of the same frequency, to separate them audibly
- also updating the refactoring comments
* audio-refactoring: cleanup refactoring remnants
remove the former avr-isr code block - since all its features are now refactored into the different parts of the current system
also updates the TODOS
* audio-refactoring: reserve negative numbers as unitialized frequencies
to allow the valid tone/frequency f=0Hz == rest/pause
* audio-refactoring: FIX: first note of melody was missing
the first note was missing because 'goto_next_note'=false overrode a state_change=true of the initial play_tone
and some code-indentations/cleanup of related parts
* audio-arm-dac: fix hardware init-click
due to wron .init= value
* audio-refactoring: new conveniance function: audio_play_click
which can be used to further refactor/remove fauxclicky (avr only) and/or the 'clicky' features
* audio-refactoring: clang-format on quantum/audio/*
* audio-avr-pwm: consecutive notes of the same frequency get a pause inserted inbetween by audio.c
* audio-refactoring: use milliseconds instead of seconds for 'click' parameters
clicks are supposed to be short, seconds make little sense
* audio-refactoring: use timer ticks instead of counters
local counters were used in the original (avr)ISR to advance an index into the lookup tables (for vibrato), and something similar was used for the tone-multiplexing feature
decoupling these from the (possibly irregular) calls to advance_state made sesne, since those counters/lookups need to be in relation to a wall-time anyway
* audio-refactoring: voices.c: drop 'envelope_index' counter in favour of timer ticks
* audio-refactoring: move vibrato and timbre related parts from audio.c to voices.c
also drops the now (globally) unused AUDIO_VIBRATO/AUDIO_ENABLE_VIBRATO defines
* audio.c: use system-ticks instead of counters the drivers have to take care of for the internal state posision
since there already is a system-tick with ms resolution, keeping count separatly with each driver implementation makes little sense; especially since they had to take special care to call audio_advance_state with the correct step/end parameters for the audio state to advance regularly and with the correct pace
* audio.c: stop notes after new ones have been started
avoids brief states of with no notes playing that would otherwise stop the hardware and might lead to clicks
* audio.c: bugfix: actually play a pause
instead of just idling/stopping which lead the pwm drivers to stop entirely...
* audio-arm-pwm: pwm-software: add inverted output
new define AUDIO_PIN_ALT_AS_NEGATIVE will generate an inverted signal on the alternate pin, which boosts the volume if a piezo is connected to both AUDIO_PIN and AUDIO_PIN_ALT
* audio-arm-dac: basic: handle piezo configured&wired to both audio pins
* audio-refactoring: docs: update for AUDIO_PIN_ALT_AS_NEGATIVE and piezo wiring
* audio.c: bugfix: use timer_elapsed32 instad of keeping timestamps
avoids running into issues when the uint32 of the timer overflows
* audio-refactoring: add 'pragma once' and remove deprecated NOTE_REST
* audio_arm_dac: basic: add missing bracket
* audio.c: fix delta calculation
was in the wrong place, needs to use the 'last_timestamp' before it was reset
* audio-refactoring: buildfix: wrong legacy macro for set_timbre
* audio.c: 16bit timerstamps suffice
* audio-refactoring: separate includes for AVR and chibios
* audio-refactoring: timbre: use uint8 instead of float
* audio-refactoring: duration: use uint16 for internal per-tone/note state
* audio-refactoring: tonemultiplexing: use uint16 instead of float
* audio-arm-dac: additive: set second pin output-low
used when a piezo is connected to AUDIO_PIN and AUDIO_PIN_ALT, with PIN_ALT_AS_NEGATIVE
* audio-refactoring: move AUDIO_PIN selection from rules.mk to config.h
to be consistent with how other features are handled in QMK
* audio-refactoring: buildfix: wrong legacy macro for set_tempo
* audio-arm-dac: additive: set second pin output-low -- FIXUP
* audio.c: do duration<>ms conversion in uint instead of float
on AVR, to save a couple of bytes in the firmware size
* audio-refactoring: cleanup eeprom defines/usage
for ARM, avr is handled automagically through the avr libc and common_features.mk
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* audio.h: throw an error if OFF is larger than MAX
* audio-arm-dac: basic: actually stop the dac-conversion on a audio_driver_stop
to put the output pin in a known state == AUDIO_DAC_OFF_VALUE, instead of just leaving them where the last conversion was... with AUDIO_PIN_ALT_AS_NEGATIVE this meant one output was left HIGH while the other was left LOW
one CAVEAT: due to this change the opposing squarewave when using both A4 and A5 with AUDIO_PIN_ALT_AS_NEGATIVE
show extra pulses at the beginning/end on one of the outputs, the two waveforms are in sync otherwise.
the extra pusles probably matter little, since this is no high-fidelity sound generation :P
* audio-arm-dac: additive: move zero-crossing code out of dac_value_generate
which is/should be user-overridable == simple, and doing one thing: providing sample values
state-transitions necessary for the zero crossing are better handled in the surrounding loop in the dac_end callback
* audio-arm-dac: dac-additive: zero-crossing: ramping up or down
after a start trigger ramp up: generate values until zero=OFF_VALUE is reached, then continue normally
same in reverse for strop trigger: output values until zero is reached/crossed, then keep OFF_VALUE on the output
* audio-arm-dac: dac-additive: BUGFIX: return OFF_VALUE when a pause is playing
fixes a bug during SONG playback, which suddenly stopped when it encoutnered a pause
* audio-arm-dac: set a sensible default for AUDIO_DAC_VALUE_OFF
1/2 MAX was probably exemplary, can't think of a setup where that would make sense :-P
* audio-arm-dac: update synth_sample/_wavetable for new pin-defines
* audio-arm-dac: default for AUDIO_DAC_VALUE_OFF
turned out that zero or max are bad default choices:
when multiple tones are played (>>5) and released at the same time (!), due to the complex waveform never reaching 'zero' the output can take quite a while to reach zero, and hence the zero-crossing code only "releases" the output waaay to late
* audio-arm-dac: additive: use DAC for negative pin
instead of PAL, which only allows the pin to be configured as output; LOW or HIGH
* audio-arm-dac: more compile-time configuration checks
* audio-refactoring: typo fixed
* audio-refactoring: clang-format on quantum/audio/*
* audio-avr-pwm: add defines for B-pin as primary/only speaker
also updates documentation.
* audio-refactoring: update documentation with proton-c config.h example
* audio-refactoring: move glissando (TODO) to voices.c
refactored/saved from the original glissando implementation in then upstream-master:audio_avr.c
still needs some work though, as it is now the calculation *should* work, but the start-frequency needs to be tracked somewhere/somehow; not only during a SONG playback but also with user input?
* audio-refactoring: cleanup: one round of aspell -c
* audio-avr-pwm: back to AUDIO_PIN
since config_common.h expands them to plain integers, the AUDIO_PIN define can directly be compared to e.g. B5
so there is no need to deal with separate defines like AUDIO_PIN_B5
* audio-refactoring: add technical documentation audio_driver.md
which moves some in-code documentation there
* audio-arm-dac: move AUDIO_PIN checks into c-code
instead of doing everything with the preprocessor, since A4/A5 do not expand to simple integers, preprocessor int-comparison is not possible. but necessary to get a consistent configuration scheme going throughout the audio-code... solution: let c-code handle the different AUDIO_PIN configurations instead (and leave code/size optimizations to the compiler)
* audio-arm-dac: compile-fix: set AUDIO_PIN if unset
workaround to get the build going again, and be backwarts compatible to arm-keyboards which not yet set the AUDIO_PIN define. until the define is enforced through an '#error"
* audio-refactoring: document tone-multiplexing feature
* audio-refactoring: Apply suggestions from documentation review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* audio-refactoring: Update docs/audio_driver.md
* audio-refactoring: docs: fix markdown newlines
Terminating a line in Markdown with <space>-<space>-<linebreak> creates an HTML single-line break (<br>).
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* audio-arm-dac: additive: fix AUDIO_PIN_ALT handling
* audio-arm-pwm: align define naming with other drivers
Co-authored-by: Joel Challis <git@zvecr.com>
* audio-refactoring: set detault tempo to 120
and add documentation for the override
* audio-refactoring: update backlight define checks to new AUDIO_PIN names
* audio-refactoring: reworking PWM related defines
to be more consistent with other QMK code
Co-authored-by: Joel Challis <git@zvecr.com>
* audio-arm: have the state-update-timer user configurable
defaulting to GPTD6 or GPTD8 for stm32f2+ (=proton-c)
stm32f1 might need to set this to GPTD4, since 6 and 8 are not available
* audio-refactoring: PLAY_NOTE_ARRAY was already removed in master
* Add prototype for startup
* Update chibiOS dac basic to disable pins on stop
* Add defaults for Proton C
* avoid hanging audio if note is completely missed
* Don't redefine pins if they're already defined
* Define A4 and A5 for CTPC support
* Add license headers to keymap files
* Remove figlet? comments
* Add DAC config to audio driver docs
* Apply suggestions from code review
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
* Add license header to py files
* correct license header
* Add JohSchneider's name to modified files
AKA credit where credit's due
* Set executable permission and change interpeter
* Add 'wave' to pip requirements
* Improve documentation
* Add some settings I missed
* Strip AUDIO_DRIVER to parse the name correctly
* fix depreciated
* Update util/audio_generate_dac_lut.py
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
* Fix type in clueboard config
* Apply suggestions from tzarc
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Johannes <you@example.com>
Co-authored-by: JohSchneider <JohSchneider@googlemail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joshua Diamond <josh@windowoffire.com>
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
* Fixed some comments in the defines file.
* Replaced the Git command layer with a Windows Terminal shortcut layer.
* Added numbered tab switching to the Windows Terminal layer.
* Added 'new tab' and 'command pane' commands to the Windows Terminal layer.
* Shortened the USB polling interval for the Iris to 1 millisecond.
* Disabled old style macros and functions for the Iris.
* enable LTO for smaller firmware size
* delete since this was added to userspace rules.mk
* readme updates and new images
* Add -j to compile and flash commands in userpsace
* Enable NKRO
* Enable NKRO, VIA, LTO by default
* Stanrc85-ansi readme update
* Stanrc85-alice readme
* quick RGB layer indicator fix in keymap
* Don't block keys during startup animation
* More refinements related to startup and debug state
* restore key logging
* some cleanup on scan rate reporting
* trim some fat
* better lighting to indicate jumped to bootloader
* use eeprom for state restoration
* a little reorganization
* report version immediately when turn on debug
* hold-to-adjust for hue, sat, val
* cformat
* reorg rules.mk settings, fix compile with CONSOLE_ENABLE=no
* simplify spidey3 userspace
* NULL in layer list caused buggy behavior
* more bugfix
* update numpad layout to match matt30 MT3 /dev/tty keycaps
* swap emdash and endash
* map shift+backspace to delete
* removing NO_ACTION_ONSHOT makes the firmware SMALLER ?!
* cformat
* improve spi_glow
* disable shift-backspace = delete by default
* Update other keyboards for rgb matrix changes
* Remove customized bootmagic code
* Fix corne layout compilation error
* Fix compiler errors with all keymaps
* Add Simple Visualizer for ergodox infinity
* Fix compile issue with Corne
* Fix keymap stuff
* Add alias for mouse layer
* Add Halmak Keyboard layout
* Updates for Kyria
* Add support for oled interval
* Change RGB stuff
[CHANGE] Fix coexistence issues
* Fix rgb_stuff
* Add custom ploopyco mouse keymap
* Decrease default dwell time
* Updates based on last breaking changes update
* Disable command on dactyl
* Update ergodox to use proper commands for rgb matrix indicators
* Update all rgb matrix indicator functions
* Update rules for dactyl-manuform
* Reduce wait time for mouse layer off event
* Add more info to logger
* Add wrappers for get_tapping term
* Move version.h include into only file that actually needs it
* Update rgb sleep stuff
* Update key print function
* Change DM keymap settings
* Change pin for DM Manuform
* Add Proton C stuff for Corne keymap
* more arm corne tinkering
* Even more arm stuff for corne
* Cleanup corne stuff
* redirect default keymap to drashna
because I am a very bad man
* change corne rgb priority
* Update tractyl manuform to not conflict
* Add more secret stuff
* more dactyl tweaks
* Add more options to split transport
* Changes of oled support
* Change split settings
* Improve keylogger formatting more
* tweak oled stuff
* Oled and such tweaks
* Reduce brightness due to leds
* Decrease brightness more
* Only run layer code if master
* chore: pulled the latest from master
Bring my redox layout from my latest redox branch
Bring my latest user stuff from my redox branch
* Update users/danielo515/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* chore: some more layouts
* feat: add gaming layer (has a bug)
* chore: more gaming layout
* chore: deactivate gaming layer when switching
* chore: simplify gaming toggle
* Update .vscode/settings.json
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Remove command and console
- these options prevent community layouts from being built on other
keyboards. Selectively enable it on keyboards I own rather than on
everything.
* Update users/yanfali/rules.mk
* Add support for LAYOUT_alice to sneakbox pcb
* define variables for sneakbox led pins
* set rules for sneakbox pcb
* add rotary encoder to userspace
* fix rotary function
* add custom layer indicators for sneakbox
* Revert "Add support for LAYOUT_alice to sneakbox pcb"
This reverts commit 5ed94d8d897de6ef4f7a349368a6342cef5eff06.
* add license header
* Use KEYBOARD_sneakbox_aliceclone
* cleaned up indicator code
* Reset everything to upstream, reapply Bocaj changes
* Bocaj - address PR comments
* Just in time changes
* Bocaj - Several adjustments after using the layout for a while
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* Minor Tweak
* Refactor spacebar defines.
* Add TMO50 layout
* Rename Atreus keymap.
* Refactor Atreus for readability.
* Eliminate tapdance quote and tweak maltroff.
* Factor out tapdance.
* Add some fancy combos and keys.
* Remove combos for now because they cause pain.
* WIP visualizer
* Alternate method for reset
* WIP2 visualizer
* Layer text tweak.
* Add made-up layout Nortron as a combination of Norman and Maltron.
* Add backspace.
* Add Talljoe keymap to Prime E.
* Fix double-colon so it doesn't press enter if shift is released early.
* Use new make command.
* Bring some modern standards into code and add licenses.
* Remove QMK_KEYBOARD_CONFIG_H and fixup QMK_KEYBOARD_H.
* Move from `biton32` to `get_highest_layer`.
* Remove PREVENT_STUCK_MODIFIERS
* Update keyboards/thevankeyboards/minivan/keymaps/talljoe-minivan/config.h
Add Eco keymap, factor Crkbd keymap to community layout, other minor tweaks
* Remove outdated Crkbd Ctrl key positioning info
* Add Left Alt key to Lily58 keymap
* Lily58 no longer overrides default TAPPING_TERM
* Refactor Crkbd keymap to use new community layout
* Fix underglow animations for Crkbd w/ Split Common
* Add initial Eco keymap
* Update outdated reference to Crkbd layout
* Add keymap links to userspace readme
* Add copyright notices to files changed in this PR
* Initial userspace
* DZ60 map
* Quefrency map
* Sinc map
* Set up MAKE key for all personal maps
* Light userspace cleanup
* Formatting and comments zzz...
* Licensing and userspace README
* Swap: EXTRAFLAGS -> LTO_ENABLE in userspace rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Improve KC_MAKE: KC_ENT -> \n
Co-authored-by: Ryan <fauxpark@gmail.com>
* Swap left grouping on _FN for pairs
* Add '?' -> backslash on _FN
* Remove commented code
* Organize lines in rules.mk
* Add left hand scroll keys
* Move configs to config.h
* License blitz
Co-authored-by: Ryan <fauxpark@gmail.com>
* Adding my keymap
* Add a starter keymap for kyria
* Updated keymap
* Add auto shift, tapping modifications and gravatar oled bitmap
* Add flashing helper scripts
* Updates to my keymap
* Enable raw hid and rgblight sleep
* Cleanup
* Updated keymap and board features
* Remove some RGB modes for space
* Start working on a miryoku-like keymap.
This adds homerow mods to my keymap on the base layer and adds
a game layer that doesnt have them
* more work on keymaps
* Fine tuning home row mods
* update keymap
* Keymap update
* add split transport
* keymap
* cherry pick from develop
* merge develop
* fix
* keymap iterations
* Refactoring
* continued refactoring
* messing with rgb
* update layer coloring
* continued refactoring
* more features
* modifier color
* Move stuff to userspace
* Moving stuff out to userspace
* refactoring into userspace
* More refactoring
* Fixing some errors in the keymap and changing the oled output
* Sync zen1 keymap to my userspace config
* Update copyright notices and revert transport.c to master
* Swap tab and esc
* Remove a file accidentally created
* Use LTO_ENABLE to turn on Link_Time_Optimization
* Drop modtap thumbs on game layout
* Update game keymap
* More iteration on the game keymap
* Add oled indications of kitty and i3 mod
* Promote colemak to default
* Update tapping term for modtap keys
* Add per key tapping term
* Use left modifiers on right side
* Add Launchpad keymap
Note: RGB and Audio won't work when using B pins for audio
* Add support for rgb matrix on launchpad
* Update config for launchpag
* Disable wait on layer change
* Update config for ErgoDox EZ
* Fixup rgb light userspace code
* Move Corne layout to community layouts folder
* Update config for corne to support community layouts
* Add license header to files
* Minor cleanup of userspace config
* Update Pimironi Trackball code
* Increase debounce time on ergodox
* Fix keymap handling
* Enable wait for USB for moonlander
* Update/add license headers
* fix review issues
* Move my custom functions and keymaps to userspace to be able to add the STM32F411 variant of my keyboard with mostly the same functionality
* Move keymaps to community layouts
* Remove keymaps from userspace readme.md
Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* First pass at manuform layout.
* Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer.
* Use a 32-bit timer that can actually hit 5 minutes.
* Some updates after a day of usage:
* Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes.
* Turn off the OLEDs after 5 minutes
* Move the keys around a bit.
* Add many more quotes.
* Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots.
* Revert osm on lgui as it makes start menu search impossible to use.
* Use LTO_ENABLE flag.
* License all of my (333fred's) keymaps as MIT.
* Update users/333fred/rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* initial keymap commit
* Keymap for coppertop commit
* removed define for layers/kc_no/kc_trns
* Modified keymap to remove definitions and add layer enum
* initial keymap commit
* Keymap for coppertop commit
* removed define for layers/kc_no/kc_trns
* Modified keymap to remove definitions and add layer enum
* Changed KC_NO and KC_TRNS to 7X and 7_
* Fixed spacing on keymaps
* TMO50: use layer_state_set_kb at keyboard level (#10150)
* Change TMO to use layer_state_set_kb as is customary at the keyboard level.
This also factors out `process_indicator_led` to a separate method.
* [Keymap] update dz60:mrsendyyk (#10160)
Update DZ60 Personal readme.md and keymap.c
* Update readme.md
* Update keymap.c
* Update keymap.c
* Update readme.md
* Update readme.md
* Update readme.md
* Update keymap.c
* Update readme.md
* Update
* Update readme.md
* Update keymap.c
* Update readme.md
* [Keyboard] YMDK NP21 refactor (#10181)
* [Keyboard] 1upkeyboards/1up60rgb: fix broken Enter (#10188)
The recent change to unnest macros put the enter on the wrong matrix key. On the 1uprgb, the ANSI and ISO enters share the same cell as does the ANSI and ISO backslash.
* no idea what this is
* Update keyboards/dz60/keymaps/coppertop/keymap.c
* Update keyboards/dz60/keymaps/coppertop/keymap.c
* Update keyboards/dz60/keymaps/coppertop/keymap.c
* Update keyboards/dz60/keymaps/spotpuff/keymap.c
* Update keyboards/dz60/keymaps/spotpuff/keymap.c
* Update keyboards/dz60/keymaps/spotpuff/keymap.c
* Added Trns labels to keymap comments.
* Revert "no idea what this is"
This reverts commit dd950f9eb3bad365961d2aa6c97c9dfbdd6219db.
* Reverted dd950f9eb3bad365961d2aa6c97c9dfbdd6219db
* fix vusb submodule
* Update keyboards/dz60/keymaps/coppertop/rules.mk
* Update keyboards/dz60/keymaps/spotpuff/rules.mk
* Update users/spotpuff/rules.mk
* Added GNU copyright license text
* chore: pulled the latest from master
Bring my redox layout from my latest redox branch
Bring my latest user stuff from my redox branch
* Update users/danielo515/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* chore: small cleanup
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
* first iteration of my keymap
* * move to userspace
* "script" modes
* keymap bling
* OM and RUPA keys
and tryin to micro-optimize in process_records.c
* woops
swap shifted rupas
forgot to add codepoint for OM
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add call to process_record_keymap, per review
* fall through to process_record_keymap
* license headers
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add IS_LAYER_ON_STATE()/IS_LAYER_OFF_STATE() macros
* Add docs for IS_LAYER_ON/OFF(_STATE) macros
* Remove IS_LAYER_ON/OFF_STATE redefinition in userspace
* Run clang-format on quantum/quantum.h
* Redefine IS_LAYER_ON/OFF(_STATE) as aliases of existing layer functions
Also update relevant doc entries.
Needs testing to check if this breaks existing IS_LAYER_ON/OFF usage in certain
edge cases (namely calling the macros with 0).
* Reformat layer check function docs
* Re-enable mouse keys to fix Chrome OS media keys
I'm not sure if there's a bug in Chrome OS, QMK, or both, but
EXTRAKEY_ENABLE isn't sufficient for media keys to work on Chrome OS.
Instead, MOUSEKEY_ENABLE is also required.
* Remove unnecessary SPLIT_USB_DETECT for Lily58
I've since swapped my Lily58 back to Elite-C v2 controllers with working
VBUS detection.
* Move Crkbd Esc and Ctrl keys; add some shortcuts
* Move MC_ALTT to userspace for cross-board support
* Sync Lily58 keymap with Crkbd
* Fix typos
* Trying to fix problems in my kyria steez
* repeating last commit.....
* repeating last commit on EDIT layer but swapping direction
exit
* moving the reversed desktop moves to the symbol layers on the same hand, for easier activation
* adding mac desktop movement keys to Kyria layout
* Adding readmes to my keymaps
* Removing a png...
* Update keyboards/ergodox_ez/keymaps/rmw/keymap-mac.c removing EPRM case
* Apply suggestions from code review
Great updates to various old-school or outdated ways I was doing things, removing some commented out code, etc.
* Apply suggestions from code review
Additional improvements
* Moving tapdances.cpp to userspace as tapdances.c
* reindenting the Kyria keymap to follow four-spaces convention, turning off oled on my kyria, improving the led handling on the Ergodox.
* updating led stuff on the other two versions of the keymap, removing EPRM key from main keymap
* Apply suggestions from code review
I'm adding these various removals to the config file because it seems that at this time those settings are in harmony with the ergodox_ez defaults.
* Moving encoder functions into their own userspace file
* Apply suggestions from code review
Removing settings that are now defaults, clearing out placeholder custom keycodes (smh)
* updating encoder functions.
* Moving to LAYOUT_stack for all layers, adding end of file newlines, switching to some shorter keycode aliases
* Okay, refactor is well underway.
* refactored! Also improved led handling for ergodox and rgb handling for kyria
* removing mac/windows swappable version because I don't feel like dealing with it when reflashing is so easy.
* moving LAYOUT_stack into kyria.h
* moving the alternate default layer down next to QWERTY
OLED Display fixes
Add support for RGBLIGHT Layers
Add gaming layer to corn and kyria
RGBLight Startup Animation fixes and improvements (uses matrix_scan now!)
Pimoroni Trackball support added (IT'S RGB!!!)
Fix issues due to code changes
* Add Chrome OS specific keys to 75_ansi/spidey3
* Clean up duplicative settings in rules.mk
* Refactor spidey3 userspace to use rgb layer blink
* Blink green on wakeup
* Improve _FN layer indicator
* Glyph transformation modes: wide, script, fraktur, and enclosed characters
* Add spider unicode glyph
* Fix compile error when NO_ACTION_ONESHOT
* Add a few more emoji
* Further refinement of lighting layer usage
* Fix reversed yes/no ack
* Lighting layers override RGB off
* Fix missing wide and incorrect script numbers
* Add LOL and surprise emoji
* Add missing break in switch statement
* Trim firmware size
* Use usage ID definitions in report.h
* Some minor whitespace cleanup
* Disable some unused features to reduce firmware size
* Print version on startup
* Seed rand() on first keystroke
* Add a key to immediately sleep CrOS
* Switch to Bootmagic Lite
* Trim down firmware size a little bit more
* Make RGBLIGHT_MODE_TWINKLE+4 my default
* Scan rate debug / fix version printing
Delay printing version on startup (console may not be ready)
Better scan rate reporting
* Disable locking caps, etc. to save more space
* Enable LTO
* Better seed for rand()
* Set MAX_LAYER for some performance improvement
* Another scan rate improvement
* Set manufacturer
* New startup animation
* Add GUI lock for F-keys (for CrOS)
* Add visual indication for glyph replacement and F-keys GUI lock
* Some cleanup; run cformat on spidey3 userspace
* Cycle between debug verbosity options
* Fix disable RGB Lighting after wakeup on Mac
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* added git codes
* started git layer
* finished structure for git layer. MOD: replaced mouse with mod keys on right hand
* layout changing layer
* mod enter. default qwerty layer. removed mods on number layer
* workman layout. git log, show. blank enter and bsspace
* config layer. toggleable ctrl/alt for OS
* removed keymap comments
* strings and combos layers. sarcasm and ctrl_ctv. RGB configs
* reintroduced enter and bspace. delete backspace as a function. git push -u and checkout -b
* string macros
* OS specific home/end
* OS mac & win keys. N delete global backspace
* refactored backspace functions
* ctrl lctv macro
* base layer toggle fix
* whitespace
* BS + L for FF and chrome
* replaced 1 keycode with userspace
* added userspace config
* remove comments
* add another keycode with a variable
* moved all keymaps and codes to common file
* ctrl z mod
* removed ctrl z
* sipmlified OS functions
* moved is_win to keyboard level
* added mac alt tab
* added ctrl tab in mac + clean up variables in art.h
* tild string macro. added mac left/right + home/end
* mac ctrl backspace
* enum layers for default layout
* added ergodone keymap
* ergodone compiles
* clean up
* clean up
* removed obsolete OS_HOME/END
* removed var
* added ctrl nav to split75
* ergodone clean up + caps lock fix 75
* fix mac ctrl alt on right handside. added mac alt tab left right
* fix ergodone config override
* fixed alt left right not working on mac
* added OS ctr_alt
* mac ctrl del. fix tild
* simplified tild macro
* git stash apply
* send_string_remembering_lenght
* shifted strings print
* restored KC_BSPACE functionality
* moved KC_BSPC
* numpad layer on Fn
* media lights
* ergodone final clean up
* ergodone GIT AND MEDIA layers
* ergodone GIT LAYER switch
* default behaviour for all modified keys on BASE layer
* refactored logic for default keycodes
* ergodone final layers
* ctrl_cav for translation and ctrl_l fix
* toggleable layer with numpad
* comments
* numpad layer
* Update users/art/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* enable dynamic macros for split75
* git branch and develop/master
* removed esc from Nav
* ergodone: ctrl alt for shift layer
* macros and right alt for ergodone
* fix ergodone N_backspace not working on git layers
* mac language switch with alt+shift
* Update users/art/art.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update users/art/art.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update users/art/art.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ergodone/keymaps/art/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update users/art/art.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* flashing leds to indicate current os
* using rshift on shifted layers
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* more stoof
* readme update
* reverting keymap
* re-adding userspace
* new userspace needed
* no want 0 under thumb
* gettin fancier with my knob
* macro fix
* had pins for oled ver
* wait, these are the right pins
* reduntant line
* image fix
* get highest layer every day
* whoops
* correct rev name in json
* a few good catches
* what I had planned
* Replace custom RCTRL implementation with built-in LM
Caveat: sends LCtrl instead of RCtrl
* Enable VIA support in KBD6X keymap
* Disable LTO on ChibiOS boards
* Disable locking support and Magic keycodes for all keymaps
* Organize and annotate rules.mk and config.h files
* Enable Console for Melody96 keymap
* L_RANGE_KEYMAP → LAYERS_KEYMAP
* Revert "Replace custom RCTRL implementation with built-in LM"
This reverts commit 17d706a82d7e31b53cd84efeb9b2ddb9922a2368.
* Set DYNAMIC_KEYMAP_LAYER_COUNT to 3 in Doro67 and Wasdat keymaps
* Enable Bootmagic Lite for all VIA keymaps
* added koy layout to qmk on xd75 board
* added koy keymap for the atreus62 board
* reduced time for autoshift
* added documentation
* changed layer 7 to a tap toggle and adjusted mouse speed a little
* Update keyboards/xd75/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* Update keyboards/xd75/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* Update keyboards/xd75/keymaps/ScheiklP/koy_common.h
* Update keyboards/atreus62/keymaps/ScheiklP/koy_common.h
* Update keyboards/atreus62/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* Update keyboards/atreus62/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* changed keymap to lowercase name to conform with qmk guidelines
* Update keyboards/xd75/keymaps/scheiklp/rules.mk
remove unnecessary rules
* Update keyboards/atreus62/keymaps/scheiklp/rules.mk
remove unnecessary rules
* moved common files for koy layouts to the users folder and removed empty file
* Update keyboards/atreus62/keymaps/scheiklp/keymap.c
* Update keyboards/xd75/keymaps/scheiklp/readme.md
* Update keyboards/xd75/keymaps/scheiklp/readme.md
* Update keyboards/atreus62/keymaps/scheiklp/readme.md
* Update keyboards/atreus62/keymaps/scheiklp/readme.md
* [Keyboard] Added D48 keyboard.
* Updated README.
* Cleanups.
* Moved d48 to handwired/
* Added link to build process album.
* Coding conventions cleanups.
* Added DS1307 RTC!
* Minor cleanups.
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Minor refactoring.
* Readme fix.
* Moved leftover keymap-specific code from keyboard space into keymap.
* Added encoder button pins to extra matrix row.
* Updated README, updated pinout & cleaned up the glcdfont
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update config.h
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Added default keymap. Refactored existing keymap.
* Update keyboards/handwired/d48/README.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Co-Authored-By: Joel Challis <git@zvecr.com>
* Minor alignment fix.
* Update keyboards/handwired/d48/glcdfont_d48.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Changes as per PR.
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* initial user directory
* fix missing endif in vi mode
* fix includes per drashna and a few typos. I have not tested the userspace keymap, it is just there to help keep the user space and keymap in sync
* move babblepaste docs to md format
* clean up block quotes
* TIL clang-format - miles2go userspace
* Remove more mouse keys settings missed in #8836
* Turn off more unwanted make options
* clang-format my userspace
* Reword ergo layout docs so Crkbd is canonical
* Add a basic readme to my userspace
* Tweak Crkbd readme wording and fix typos
* Enable SPLIT_USB_DETECT for Lily58 w/ Elite-C bug
* Give Tsangan layout a real Fn2 layer
* Disable mouse keys to work around qmk#8323
I don't actually use this feature, so there's no reason for it to be
enabled anyway, and it seems to cause spurious wakeups on Windows.
* First cut at Josh Diamond's KBD75 customizations.
Includes:
* My unique keymap with ChromeOS specific keys
* Use RGB underglow to indicate Caps Lock
* Some unicode bindings
* Some changes to make debugging easier
* Updated spidey3 to be applicable to all 75_ansi boards
* Sadly, ChromeOS doesn't pay attention to most consumer codes
* Add mac layer; fix flakeyness in CAPS_LOCK underglow.
* Make layers.json match the keymap (to the extent possible)
* Major cleanup; fix broken debug persistence
* Cleanup some whitespace issues
* Fix incorrect log message.
* Rework layer indication to user RGBLIGHT_LAYERS
* Update layouts/community/75_ansi/spidey3/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Rename users/spidey3/rgblight.c to layer_rgb.c per suggestion
* Refactor to use set_single_persistant_default_layer().
* Use dprint/f to make logging more elegant.
* Update users/spidey3/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update users/spidey3/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update layouts/community/75_ansi/spidey3/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/spidey3.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/layer_rgb.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/init.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Changes from code review
* Numpad layer, various keys for 75_ansi/spidey3
* Add Fn-B to toggle NKRO
* Blink rgb to acknowledge some setting changes
* Updated media control & reset key location
* Minor cleanup
Co-authored-by: Joshua Diamond <jdiamond@Deep-Thought.local>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update mousekey parameters in userspace
* Disable GRAVE_ESC in boards where it isn't used
* Tweak MODERN_DOLCH_RED and reset RGB on Shift+Toggle in KBD6X
* Disable RGB controls when Fn/Caps indicator lights are on
* Use LTO_ENABLE instead of setting -flto directly
* Add led_update_keymap, use SS_LCTL instead of SS_LCTRL
* Change TAPPING_TOGGLE from 2 to 3
* enable rgblight layers
* rgblight layers code
* switch to new rgblight layers
* testing led positions
* fix caps typo
* lights and colors working
* rules updated for different rgb use
* Extra spaces removed
* Selectively adding pieces
* Adding georgi keymap
* Adding more files, fixing make
* Smaller makefiles
* Fixing make rules
* README more inline with QMK's guidelines
* Turning off buggy assert
* Improving documentation based on a user feedback.
* Slightly better schema
* Resurrected state machine diagram
* Enable External EEPROM on Planck Rev6
* Update KC_MAKE macro to use qmk cli util
* Disable additional gradients for rgb matrix
* Update analog code for newer methods
* Update ergodox layout
* Disable Grave Escape
* Cleanup OLED code a bit
* Remove old unicode code
* Seperate RGB Matrix code from RGB Light code in userspace
* Massive overhaul an generalization of personal OLED code
Now lets hope I NEVER get a keyboard using a 128x32 in a normal orientation.
* Super tiny cleanup
* Enable Diablo layer on kyria
* clang format pass
* Additional OLED cleanup
* remove IT_PIPE duplicate and add IT_GRAD
IT_PIPE was declared 2 times, ones as ° and once as |. I changed the first declaration and called it IT_GRAD. I even fixed the definition because the ° in Italian is obtained with LSFT(IT_AACC)
* rename IT_GRAD to IT_DEGR
* fix missing music mode legend
* add missing plus_and_minus
* fix missing IT_ACUT definition
* change KC_LALT(KC_LSFT to LALT(LSFT
* Fix alignment
* remove leftover
* fix issue generated with chars while pushing
* fix typo
* add sigul folder in Planck keymaps
* fix LCBR and RCBR
* fix euro symbol
* fix RBRC
* change IT_LESS form KC_NUBS to KC_GRAVE
* add IT_TILDE and change IT_GRAV to IT_GRAVE
* initial commit
* add ideas to readme
* comment key lock
* add a bunch of new features as stated in readme.md
* check features added and list to do
* add macros on RAISE
* add F keys on numbers row on FN layer
* flag features added
* fix macro formulas
* move DESK and SGCOM under D and S
* invert IT_EACC and S(IT_EACC) to align the layout with that of the default Planck
* invert IT_EACC and S(IT_EACC) to align the layout with that of the default Planck
fix spaces for readability
* add missing legends for accented vowels
* format for readability
* move MOUSE button on B (same key that activates it) on MOUSE layer
* revert to commit befor I edit it
* initial commit
* edited to be easier to compare to _ansi.h
* remove keymap_italian_osx_iso.h and rename with edits keymap_italian_osx_ansi.h to keymap_italian_osx.h
I found out there were no difference at all
* fix missing #endif
* change the included file from italian.h to italian_osx.h
* fix debug key
* edit Numapd layer, add enter and bsps
* change TAPPING_TOGGLE from 2 to 3
* change italian_osx.h to italian_ansi.h
* rename quantum/keymap_extras/keymap_italian_osx.h to quantum/keymap_extras/keymap_italian_ansi.h
Now this file is a clone of the keymap_italian.h that appears to be working only for ISO keyboards. It also contains a few improvements for IT_PIPE (defined two times) and IT_ACUT (missing definition). Additionally it redefines LCBR and RCBR to LSFT(IT_LBRC) and LSFT(IT_RBRC)
* rename file
* redefines IT_BKSL and IT_PIPE based on KC_BKSL
* merge new italian
* add new osx_iso and osx_ansi version for italian.h and align BKSL to BSLS, fix double definition of PIPE
* rename BKSL to BSLS
* add FN_D and some comments
* add MOUSEKEY configuration
* update
* edit swap =/+ with ò/ì
* merge with master
* add MS_B to have _MOUSE when pressing B
* move RAISE on _FN
* add phone number
* remove CONTRA folder
* remove CONTRA folder
* Update keyboards/planck/keymaps/sigul/keymap.c
fix include definition
Co-Authored-By: Ryan <fauxpark@gmail.com>
* remove default planck kemap
* remove extern keymap_config_t keymap_config;
based on suggestion from @fauxpark, It's not needed as it should already be externed through one of the includes provided by QMK_KEYBOARD_H.
Co-Authored-By: Ryan <fauxpark@gmail.com>
* add user space for user sigul
* remove custom config moved to user space sigul
* comment tri layers state (moved to user space)
* remove tri layers update comment (code moved in user space)
* add secrets
* move enum and define to userspace
* Edit title
* move enum and define to sigul.h
* add thanks
* edit: moving to userspace enum, define and process_records
* add enum and defines
* add process_records
* cleaning code after moving code to user space
* add process_records
* cleaning code
* adding rules to manage secrets
* remove secretes
* first commit
* add macro timer
* add keycodes macro
* edit custom keycodes order
* add strings to send inside the secrets array
* remove codes for secrets & change secret to secrets
* edit secrets keycodes
* edit keycodes names and order
* add secrets.h and secrets.c
* add #pragma once
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update .gitignore
Co-Authored-By: Joel Challis <git@zvecr.com>
* add local gitignore for secrets
* remove secrets
* update for secrets
* change FN_D to IT_D
* remove FN_D definition
Co-authored-by: pisilvio <silvio@picampus.it>
Co-authored-by: admin <admin@admins-MacBook-Pro.local>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Rename UC_OSX (and related constants) to UC_MAC
* Update UNICODE_SONG_OSX references to UNICODE_SONG_MAC
* Update UC_M_OS references to UC_M_MA
* Add UC_OSX alias for backwards compatibility
* Add deprecation warning for UC_OSX to Unicode docs
* Add UC_M_OS alias for backwards compatibility
* Update newly found UC_M_OS and UNICODE_SONG_OSX references
* Add legacy UNICODE_MODE_OSX alias, revert changes to user keymaps
* Add legacy UNICODE_SONG_OSX alias, revert changes to user keymaps
* Replace removed sounds in Unicode song doc examples
* convert my 60 keymap to alice
* add via to rules for alice
* remove split backspace and add backlight keycodes
* disable LTO for alice pcb
* keymap alignment formatting
* First cut at Josh Diamond's KBD75 customizations.
Includes:
* My unique keymap with ChromeOS specific keys
* Use RGB underglow to indicate Caps Lock
* Some unicode bindings
* Some changes to make debugging easier
* Updated spidey3 to be applicable to all 75_ansi boards
* Sadly, ChromeOS doesn't pay attention to most consumer codes
* Add mac layer; fix flakeyness in CAPS_LOCK underglow.
* Make layers.json match the keymap (to the extent possible)
* Major cleanup; fix broken debug persistence
* Cleanup some whitespace issues
* Fix incorrect log message.
* Rework layer indication to user RGBLIGHT_LAYERS
* Update layouts/community/75_ansi/spidey3/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Rename users/spidey3/rgblight.c to layer_rgb.c per suggestion
* Refactor to use set_single_persistant_default_layer().
* Use dprint/f to make logging more elegant.
* Update users/spidey3/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update users/spidey3/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update layouts/community/75_ansi/spidey3/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/spidey3.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/layer_rgb.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update users/spidey3/init.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Changes from code review
Co-authored-by: Joshua Diamond <jdiamond@Deep-Thought.local>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* feat(build): added script for compiling with docker easily
* chore: bring my own build with docker to master
* chore: delete a file that does not make sense anymore
* feat: first redox for danielo
* chore: basic compatibility between redox and my space
* refactor: removed some old stuff
* feat: added go coding symbols
* feat: name control_k and alt_j
* chore: reduce combo term
* feat: improved first layer of redox
* feat: add configurations to the redox
* feat: make alt tab more portable
* feat: small improvements to redox layout
* feat: added leader
* refactor: move leader defs to my userspace config
* chore: movement modified
* feat: more predefined keys and a a new combo
* feat: redox alt tab functionality
* refactor: move alt_tab processing to a separate file
* refactor: early return
* refactor: move process record to a separate file
* format leader function
* chore: backspace on digits layer
* feat: add extra combo
* feat: added more combos
* implement guard proposed by @drashna
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* chore: include @drashna placeholder suggestion
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
