mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-25 09:56:54 +06:00
Code Issues Packages Projects Releases Wiki Activity
fba0408cb3
keychron_qmk_firmware/keyboards/cannonkeys/db60
History
Nick Brassel 45dc2499dc
Remove all via-enabled keymaps, including via. (#24322)
2024-08-26 07:51:22 +10:00
..
hotswap
j02 Update Underglow keycodes (#23765) 2024-08-25 22:15:07 +10:00
keymaps Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
rev2 Update Underglow keycodes (#23765) 2024-08-25 22:15:07 +10:00
chconf.h
config.h Migrate LOCKING_*_ENABLE to Data-Driven: A-C, Part 1 (#23745) 2024-05-20 21:07:40 +01:00
halconf.h
info.json Migrate LOCKING_*_ENABLE to Data-Driven: A-C, Part 1 (#23745) 2024-05-20 21:07:40 +01:00
mcuconf.h
readme.md
rules.mk

readme.md

CannonKeys DB60

DB60 "Daughterboard 60" Keyboard

  • Keyboard Maintainer: Andrew Kannan
  • Hardware Supported: STM32F072CBT6 (or equivalent)

Make example for this keyboard (after setting up your build environment):

make cannonkeys/db60/rev2:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Some notes about the versions: The original DB60 was shipped with the J-02. To build that, you will need to use the following command:

make cannonkeys/db60/j02:default

Solderable DB60s were shipped with keyboards after the J-02. This variant has cutouts along the top and bottom to support O-ring gasket mounting. To build these, you can use this command:

make cannonkeys/db60/rev2:default

Hotswap ANSI DB60s were shipped with the Bakeneko keyboards from CannonKeys. These also have the o-ring gasket mounting points. To build this:

make cannonkeys/db60/hotswap:default