mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-22 00:16:41 +06:00
Code Issues Packages Projects Releases Wiki Activity
fb3a414a40
keychron_qmk_firmware/keyboards/pegasus
History
James Young bfa05cc5e7
Migrate LOCKING_*_ENABLE to Data-Driven: P, Part 1 (#23779) 
Affects:

  - `p3d/eu_isolation`
  - `p3d/glitch`
  - `p3d/q4z`
  - `p3d/synapse`
  - `p3d/tw40`
  - `panc40`
  - `papercranekeyboards/gerald65`
  - `parallel/parallel_65/hotswap`
  - `parallel/parallel_65/soldered`
  - `pdxkbc`
  - `pearlboards/atlas`
  - `pearlboards/pandora`
  - `pearlboards/pearl`
  - `pearlboards/zeus`
  - `pearlboards/zeuspad`
  - `pegasus`
  - `phantom`
  - `phoenix`
  - `picolab/frusta_fundamental`
  - `pimentoso/paddino02/rev1`
  - `pimentoso/paddino02/rev2/left`
  - `pimentoso/paddino02/rev2/right`
  - `pisces`
  - `pizzakeyboards/pizza65`
  - `pkb65`
  - `planck`
  - `playkbtw/ca66`
  - `playkbtw/pk60`
  - `playkbtw/pk64rgb`
  - `pluckey`
  - `plume/plume65`
  - `plywrks/ahgase`
  - `plywrks/lune`
  - `pohjolaworks/louhi`
  - `polycarbdiet/s20`
  - `pom_keyboards/tnln95`
  - `portal_66/hotswap`
  - `portal_66/soldered`
  - `pos78`
2024-05-23 19:49:48 +01:00
..
keymaps
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: P, Part 1 (#23779) 2024-05-23 19:49:48 +01:00
pegasus.c
readme.md

readme.md

Pegasus

pegasus

Pegasus is a 40% keyboard with a 12.75u "WKL" layout with 0.75u blockers.

  • Keyboard Maintainer: melonbred
  • Hardware Supported: The PCBs, controllers supported
  • Hardware Availability: Links to where you can find this hardware

Make example for this keyboard (after setting up your build environment):

make pegasus:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available