mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-28 03:26:51 +06:00
6f36eb469d
* Remove unused IS_COMMAND() instances from keyboard-level config.h, 0-9 * Remove unused IS_COMMAND() instances from keyboard-level config.h, A-B * Remove unused IS_COMMAND() instances from keyboard-level config.h, C-D * Remove unused IS_COMMAND() instances from keyboard-level config.h, E-G * Remove unused IS_COMMAND() instances from keyboard-level config.h, handwired * Remove unused IS_COMMAND() instances from keyboard-level config.h, H-M * Remove unused IS_COMMAND() instances from keyboard-level config.h, N-R * Remove unused IS_COMMAND() instances from keyboard-level config.h, S-Z * Remove unused Magic Key definitions from keyboard-level config.h, 0-9 * Remove unused Magic Key definitions from keyboard-level config.h, A * Remove unused Magic Key definitions from keyboard-level config.h, B * Remove unused Magic Key definitions from keyboard-level config.h, C * Remove unused Magic Key definitions from keyboard-level config.h, D-E * Remove unused Magic Key definitions from keyboard-level config.h, F-H * Remove unused Magic Key definitions from keyboard-level config.h, handwired * Remove unused Magic Key definitions from keyboard-level config.h, I-K * Remove unused Magic Key definitions from keyboard-level config.h, L-M * Remove unused Magic Key definitions from keyboard-level config.h, N-R * Remove unused Magic Key definitions from keyboard-level config.h, S-V * Remove unused Magic Key definitions from keyboard-level config.h, W-Z * Merge remote-tracking branch 'upstream/master' into clean/command_and_magic * Remove remaining unused IS_COMMAND() instances from keyboard-level config.h
171 lines
5.7 KiB
C
171 lines
5.7 KiB
C
/*
|
|
Copyright 2020 yushakobo
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "config_common.h"
|
|
#include <stdio.h>
|
|
|
|
/* USB Device descriptor parameter */
|
|
#define VENDOR_ID 0x3265 //yushakobo
|
|
#define PRODUCT_ID 0x0004 //Helix rev3 4rows
|
|
#define DEVICE_VER 0x0001
|
|
#define MANUFACTURER yushakobo
|
|
#define PRODUCT Helix rev3 4rows
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 8
|
|
#define MATRIX_COLS 7
|
|
|
|
/*
|
|
* Keyboard Matrix Assignments
|
|
*
|
|
* Change this to how you wired your keyboard
|
|
* COLS: AVR pins used for columns, left to right
|
|
* ROWS: AVR pins used for rows, top to bottom
|
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
*
|
|
*/
|
|
#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
|
|
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
|
|
#define UNUSED_PINS
|
|
|
|
/* COL2ROW, ROW2COL*/
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
/* Split hand configration */
|
|
#define SPLIT_HAND_MATRIX_GRID D7,B2
|
|
#define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT
|
|
|
|
/* Dip switch on matrix grid */
|
|
#define DIP_SWITCH_MATRIX_GRID { {0,6}, {1,6}, {5,6}, {6,6} }
|
|
|
|
/*
|
|
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
|
*/
|
|
#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
|
|
|
|
#define RGB_DI_PIN D3
|
|
#define RGBLED_NUM 50 // Number of LEDs
|
|
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
#define DRIVER_LED_TOTAL RGBLED_NUM
|
|
# define RGB_MATRIX_KEYPRESSES // reacts to keypresses
|
|
// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
|
|
// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
|
|
# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
|
|
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
|
// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
|
|
// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
|
|
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
|
|
# define RGB_MATRIX_HUE_STEP 8
|
|
# define RGB_MATRIX_SAT_STEP 8
|
|
# define RGB_MATRIX_VAL_STEP 8
|
|
# define RGB_MATRIX_SPD_STEP 10
|
|
#endif
|
|
|
|
#ifdef RGBLIGHT_ENABLE
|
|
#define RGBLIGHT_SPLIT
|
|
#define RGBLED_SPLIT { 25, 25 }
|
|
// #define RGBLIGHT_HUE_STEP 8
|
|
// #define RGBLIGHT_SAT_STEP 8
|
|
// #define RGBLIGHT_VAL_STEP 8
|
|
#define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
|
|
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
|
// /*== all animations enable ==*/
|
|
// #define RGBLIGHT_ANIMATIONS
|
|
// /*== or choose animations ==*/
|
|
// #define RGBLIGHT_EFFECT_BREATHING
|
|
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
|
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
|
// #define RGBLIGHT_EFFECT_SNAKE
|
|
// #define RGBLIGHT_EFFECT_KNIGHT
|
|
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
|
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
|
#define RGBLIGHT_EFFECT_RGB_TEST
|
|
// #define RGBLIGHT_EFFECT_ALTERNATING
|
|
#endif
|
|
|
|
/* Custom font */
|
|
#define OLED_FONT_H "keyboards/helix/common/glcdfont.c"
|
|
|
|
/* Encorder */
|
|
#define ENCODERS_PAD_A { B6 }
|
|
#define ENCODERS_PAD_B { B5 }
|
|
|
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
#define DEBOUNCE 5
|
|
|
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
|
//#define MATRIX_HAS_GHOST
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
#define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
#define LOCKING_RESYNC_ENABLE
|
|
|
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
|
*/
|
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
|
|
|
/*
|
|
* Force NKRO
|
|
*
|
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
* makefile for this to work.)
|
|
*
|
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
* until the next keyboard reset.
|
|
*
|
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
* fully operational during normal computer usage.
|
|
*
|
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
* power-up.
|
|
*
|
|
*/
|
|
//#define FORCE_NKRO
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|
|
|
|
/* disable these deprecated features by default */
|
|
#define NO_ACTION_MACRO
|
|
#define NO_ACTION_FUNCTION
|
|
|
|
/* Bootmagic Lite key configuration */
|
|
// #define BOOTMAGIC_LITE_ROW 0
|
|
// #define BOOTMAGIC_LITE_COLUMN 0
|