mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-22 16:37:58 +06:00
17bda000f3
* id80: New keyboard (IDOBAO ID80) Add initial support for the IDOBAO ID80 keyboard. Most source files were generated by the KBFirmware JSON to QMK Parser (https://noroadsleft.github.io/kbf_qmk_converter/) based on the ID80.json file provided by the keyboard vendor. The only change to rules.mk was to set `COMMAND_ENABLE = no` to make the compiled firmware fit into the available flash space. * id80: Update default keymap to match stock Update the Fn layer in the default keymap to match the stock firmware which was actually flashed into the PCB. * id80: Add Caps Lock indicator support Although the KBFirmware JSON includes information about the MCU pins used for keyboard indicator LEDs, the KBF to QMK converter does not generate the required code automatically. Implement the LED handling code, and at the same time switch from the older `led_set_kb` API to the newer `led_update_kb`. * id80: Remove placeholder functions The provided skeletons for `matrix_scan_kb` and `process_record_kb` did not do anything useful, so remove them. * id80: Use Esc as the Bootmagic Lite activation key The Esc key is not at the (0, 0) position in the ID80 matrix, therefore setting `BOOTMAGIC_LITE_ROW` and `BOOTMAGIC_LITE_COLUMN` is required to use the Esc key for Bootmagic Lite. * id80: Update info.json Replace info.json generated by the KBF to QMK converter with another version generated using http://www.keyboard-layout-editor.com/ and the KLE raw to QMK info.json converter (https://qmk.fm/converter/). The updated info.json has the correct physical layout (the distance between the function key row and the main block is actually 0.25U, but the vendor-provided ID80.json had 0.5U there) and correct key labels (using the stock layout instead of raw matrix locations and pin names). * id80: Enable NKRO The default keymap is updated to have NK_TOGG at Fn+N, like most other keyboards which have NKRO enabled. * id80: Use unique USB vendor/product ID Having an unique USB vendor/product ID is required for VIA support. The vendor ID value is the same as for the `idobo` (ID75) keyboard. * id80: Fix right modifiers in the default keymap For some reason the default keymap converted from the vendor-supplied JSON had the right Shift, Alt and Ctrl keys mapped to the left side modifier keycodes. * id80: Remove empty row 6 (F0) from matrix The matrix layout which was defined in the vendor-supplied ID80.json file had 12 rows which corresponded to the left and right parts of the 6 physical rows. However, the row 6 of the matrix (connected to the F0 pin), which corresponded to the right part of the physical bottom row, was completely empty (all 9 keys of the bottom row were placed in the matrix row for the left part). Keeping this row in the matrix just wastes resources; in particular, when the VIA support is enabled, having a 9×12 matrix with 4 layers leaves only 122 bytes available for dynamic macros, which is less than the recommended minimum of 128 bytes. Removing the unused row reduces the matrix size to 9×11, which leaves 194 bytes of EEPROM space for dynamic macros. * id80: Update row numbers in the LAYOUT macro Update row numbers in the names of the LAYOUT macro parameters after removing a row in the middle. * id80: Set RGBLED_NUM to 20 to match the actual PCB The vendor-supplied ID80.json file specified that the PCB should have 28 RGB LEDs in the chain. However, the actual PCB that was shipped from AliExpress had 20 LEDs in the chain (16 underglow LEDs, and then 4 more LEDs on top of the PCB, to the right of the Enter key location). Update RGBLED_NUM to match the actual PCB.
37 lines
1.4 KiB
Makefile
37 lines
1.4 KiB
Makefile
# MCU name
|
|
MCU = atmega32u4
|
|
|
|
# Bootloader selection
|
|
# Teensy halfkay
|
|
# Pro Micro caterina
|
|
# Atmel DFU atmel-dfu
|
|
# LUFA DFU lufa-dfu
|
|
# QMK DFU qmk-dfu
|
|
# ATmega32A bootloadHID
|
|
# ATmega328P USBasp
|
|
BOOTLOADER = atmel-dfu
|
|
|
|
# Build Options
|
|
# change yes to no to disable
|
|
#
|
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
CONSOLE_ENABLE = yes # Console for debug
|
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
|
MIDI_ENABLE = no # MIDI support
|
|
UNICODE_ENABLE = no # Unicode
|
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
AUDIO_ENABLE = no # Audio output on port C6
|
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
|
|
|
# partially generated by KBFirmware JSON to QMK Parser
|
|
# https://noroadsleft.github.io/kbf_qmk_converter/
|