mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-25 09:56:54 +06:00
Code Issues Packages Projects Releases Wiki Activity
e40b6ca3b0
keychron_qmk_firmware/keyboards/hineybush/h08_ocelot
History
Ryan ad625e7c06
Remove RGB_DI_PIN ifdefs (#20218)
2023-03-23 21:38:01 +11:00
..
keymaps
config.h Remove RGB_DI_PIN ifdefs (#20218) 2023-03-23 21:38:01 +11:00
h08_ocelot.h
info.json Move matrix config to info.json, part 2 (#19987) 2023-03-10 22:16:56 +11:00
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

h08

h08

8-key macropad for the Singa Ocelot.

  • Keyboard Maintainer: hineybush
  • Hardware Supported: h08
  • Hardware Availability: Singa Ocelot

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Make example for this keyboard (after setting up your build environment):

make hineybush/h08_ocelot:default

Flashing example for this keyboard:

make hineybush/h08_ocelot:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.