keychron_qmk_firmware/keyboards/40percentclub/4x4
Drashna Jaelre b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition
2019-01-26 15:49:45 -08:00
..
keymaps/default Tidy 40percentclub boards (#4403) 2018-11-12 12:02:28 -08:00
4x4.c
4x4.h Keyboard: 40percentclub - enable 4x4 and 5x5 community keymaps (#4437) 2018-11-26 09:27:07 -08:00
config.h Adds a default value for IS_COMMAND for COMMAND feature (#4301) 2019-01-26 15:49:45 -08:00
readme.md
rules.mk Keyboard: 40percentclub - enable 4x4 and 5x5 community keymaps (#4437) 2018-11-26 09:27:07 -08:00

4x4

4x4

Modular keypad/keyboard
The basic unit is a 4x4 matrix with 16 keys. Up to 4 of these can be connected to each other side by side.
4x4, 4x8, 4x12 and 4x16 are possible.
There are pads for header pins on each side that complete the circuits from board to board. These can be permanently connected with solder bridges or temporarily with pin headers and shunt jumpers.
All configurations are powered by a SINGLE Arduino Micro or clone (NOT a Pro Micro).

Keyboard Maintainer: QMK Community
Hardware Supported: 4x4 PCB
Hardware Availability: 4x4x4x4x4 project on 40% Keyboards

Make example for this keyboard (after setting up your build environment):

make 40percentclub/4x4:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.