mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-23 00:47:02 +06:00
506 lines
17 KiB
C
506 lines
17 KiB
C
/*
|
|
Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org>
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* LED controller code
|
|
* WF uses IS31FL3731C matrix LED driver from ISSI
|
|
* datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "print.h"
|
|
|
|
#include "led_controller.h"
|
|
|
|
#include "suspend.h"
|
|
|
|
#include "usb_main.h"
|
|
|
|
/* Infinity60 LED MAP
|
|
- digits mean "row" and "col", i.e. 45 means C4-5 in the IS31 datasheet, matrix A
|
|
|
|
11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
|
|
28 31 32 33 34 35 36 37 38 41 42 43 44 45
|
|
46 47 48 51 52 53 54 55 56 57 58 61 62
|
|
63 64 65 66 67 68 71 72 73 74 75 76 77*
|
|
78 81 82 83 84 85 86 87
|
|
|
|
*Unused in Alphabet Layout
|
|
*/
|
|
|
|
/*
|
|
each page has 0xB4 bytes
|
|
0 - 0x11: LED control (on/off):
|
|
order: CA1, CB1, CA2, CB2, .... (CA - matrix A, CB - matrix B)
|
|
CAn controls Cn-8 .. Cn-1 (LSbit)
|
|
0x12 - 0x23: blink control (like "LED control")
|
|
0x24 - 0xB3: PWM control: byte per LED, 0xFF max on
|
|
order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
|
|
*/
|
|
|
|
/* Which LED should be used for CAPS LOCK indicator
|
|
* The usual Caps Lock position is C4-6, so the address is
|
|
* 0x24 + (4-1)*0x10 + (8-1) = 0x59 */
|
|
#if !defined(CAPS_LOCK_LED_ADDRESS)
|
|
#define CAPS_LOCK_LED_ADDRESS 0x46
|
|
#endif
|
|
|
|
#if !defined(NUM_LOCK_LED_ADDRESS)
|
|
#define NUM_LOCK_LED_ADDRESS 0x85
|
|
#endif
|
|
|
|
/* Which LED should breathe during sleep */
|
|
#if !defined(BREATHE_LED_ADDRESS)
|
|
#define BREATHE_LED_ADDRESS CAPS_LOCK_LED_ADDRESS
|
|
#endif
|
|
|
|
/* =================
|
|
* ChibiOS I2C setup
|
|
* ================= */
|
|
static const I2CConfig i2ccfg = {
|
|
400000 // clock speed (Hz); 400kHz max for IS31
|
|
};
|
|
|
|
/* ==============
|
|
* variables
|
|
* ============== */
|
|
// internal communication buffers
|
|
uint8_t tx[2] __attribute__((aligned(2)));
|
|
uint8_t rx[1] __attribute__((aligned(2)));
|
|
|
|
// buffer for sending the whole page at once (used also as a temp buffer)
|
|
uint8_t full_page[0xB4+1] = {0};
|
|
|
|
// LED mask (which LEDs are present, selected by bits)
|
|
// See page comment above, control alternates CA matrix/CB matrix
|
|
// IC60 pcb uses only CA matrix.
|
|
// Each byte is a control pin for 8 leds ordered 8-1
|
|
const uint8_t is31_ic60_leds_mask[0x12] = {
|
|
0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF,
|
|
0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00
|
|
};
|
|
|
|
// array to hold brightness pwm steps
|
|
const uint8_t pwm_levels[5] = {
|
|
0x00, 0x16, 0x4E, 0xA1, 0xFF
|
|
};
|
|
|
|
// array to write to pwm register
|
|
uint8_t pwm_reg_array[9] = {0};
|
|
|
|
|
|
/* ============================
|
|
* communication functions
|
|
* ============================ */
|
|
msg_t is31_select_page(uint8_t page) {
|
|
tx[0] = IS31_COMMANDREGISTER;
|
|
tx[1] = page;
|
|
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
|
|
}
|
|
|
|
msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size) {
|
|
is31_select_page(page);
|
|
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, buffer, size, NULL, 0, US2ST(IS31_TIMEOUT));
|
|
}
|
|
|
|
msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
|
|
is31_select_page(page);
|
|
tx[0] = reg;
|
|
tx[1] = data;
|
|
xprintf("page display: %X\n", page);
|
|
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
|
|
}
|
|
|
|
msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
|
|
is31_select_page(page);
|
|
|
|
tx[0] = reg;
|
|
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, US2ST(IS31_TIMEOUT));
|
|
}
|
|
|
|
/* ========================
|
|
* initialise the IS31 chip
|
|
* ======================== */
|
|
void is31_init(void) {
|
|
// just to be sure that it's all zeroes
|
|
__builtin_memset(full_page,0,0xB4+1);
|
|
// zero function page, all registers (assuming full_page is all zeroes)
|
|
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
|
|
// disable hardware shutdown
|
|
palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
|
|
palSetPad(GPIOB, 16);
|
|
chThdSleepMilliseconds(10);
|
|
// software shutdown
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, 0);
|
|
chThdSleepMilliseconds(10);
|
|
// TODO: This already done above, remove?
|
|
// zero function page, all registers
|
|
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
|
|
chThdSleepMilliseconds(10);
|
|
// software shutdown disable (i.e. turn stuff on)
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
|
|
chThdSleepMilliseconds(10);
|
|
// zero all LED registers on all 8 pages
|
|
uint8_t i;
|
|
for(i=0; i<8; i++) {
|
|
is31_write_data(i, full_page, 0xB4 + 1);
|
|
chThdSleepMilliseconds(1);
|
|
}
|
|
}
|
|
|
|
/* ==================
|
|
* LED control thread
|
|
* ================== */
|
|
#define LED_MAILBOX_NUM_MSGS 5
|
|
static msg_t led_mailbox_queue[LED_MAILBOX_NUM_MSGS];
|
|
mailbox_t led_mailbox;
|
|
static THD_WORKING_AREA(waLEDthread, 256);
|
|
static THD_FUNCTION(LEDthread, arg) {
|
|
(void)arg;
|
|
chRegSetThreadName("LEDthread");
|
|
|
|
uint8_t i, page;
|
|
|
|
//persistent status variables
|
|
uint8_t backlight_status, lock_status, led_step, active_layer;
|
|
uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
|
|
|
|
//mailbox variables
|
|
uint8_t temp, msg_type, msg_led;
|
|
msg_t msg;
|
|
|
|
/* //control register variables
|
|
uint8_t page, save_page, save_breath1, save_breath2;
|
|
msg_t msg, retval;
|
|
*/
|
|
|
|
// initialize persistent variables
|
|
backlight_status = 0;
|
|
lock_status = 0;//TODO: does keyboard remember locks?
|
|
led_step = 4; //full brightness
|
|
active_layer = 0;
|
|
|
|
while(true) {
|
|
// wait for a message (asynchronous)
|
|
// (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't
|
|
// be processed right away)
|
|
chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
|
|
msg_type = (msg >> 8) & 0xFF; //first byte is msg type
|
|
msg_led = (msg) & 0xFF; //second byte is action information
|
|
|
|
xprintf("--------------------\n");
|
|
xprintf("mailbox fetch\nmsg: %X\n", msg);
|
|
xprintf("type: %X - led: %X\n", msg_type, msg_led); //test if msg_type is 1 or 2 bytes after mask
|
|
switch (msg_type){
|
|
case KEY_LIGHT:
|
|
//TODO: lighting key led on keypress
|
|
break;
|
|
|
|
case TOGGLE_LED:
|
|
//TODO: toggle existing indicator off, or let user do this, but write frame 7 for every led change
|
|
//turn on single led, msg_led = row/col of led
|
|
set_led_bit(led_control_reg, msg_led, 1);
|
|
|
|
is31_write_data (7, led_control_reg, 0x12+1);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
|
active_layer = 7;
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
|
xprintf("page display: %X\n", temp);
|
|
break;
|
|
|
|
case TOGGLE_ALL:
|
|
xprintf("TOGGLE_ALL\n");
|
|
//msg_led = unused, TODO: consider using msg_led to toggle layer display
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
|
|
|
xprintf("temp: %X\n", temp);
|
|
//if LED_ALL is on then toggle off, any other layer, turn on LED_ALL
|
|
if(temp == 1) {
|
|
xprintf("page display true: %X\n", temp);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
|
|
} else {
|
|
xprintf("page display false: %X\n", temp);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 1);
|
|
}
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
|
xprintf("page display: %X\n", temp);
|
|
break;
|
|
|
|
case TOGGLE_BACKLIGHT:
|
|
//msg_led = unused
|
|
backlight_status ^= 1;
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
|
active_layer = temp;
|
|
|
|
page = backlight_status == 0 ? 0 : active_layer;
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, page);
|
|
break;
|
|
|
|
case TOGGLE_LAYER_LEDS://show layer indicator or full map of layer keys.
|
|
//TODO: change so user can flag which they want, indiv or full map in fn_actions
|
|
//msg_led = layer to toggle on
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
|
|
|
if(temp == msg_led) {
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
|
active_layer = 7;
|
|
} else {
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_led);
|
|
active_layer = msg_led;
|
|
}
|
|
break;
|
|
|
|
case TOGGLE_LOCK_LED:
|
|
//msg_led = 0-3 for lock flags
|
|
lock_status ^= msg_led; //TODO: confirm toggling works and doesn't get out of sync
|
|
set_lock_leds(led_control_reg, lock_status);
|
|
break;
|
|
|
|
case MODE_BREATH:
|
|
break;
|
|
case STEP_BRIGHTNESS:
|
|
//pwm_levels[] bounds checking, loop through array
|
|
//TODO: find a cleaner way to walk through this logic
|
|
if (msg_led == 0) {
|
|
if (led_step == 0) {
|
|
led_step = 4;
|
|
} else {
|
|
led_step--;
|
|
}
|
|
} else {
|
|
if (led_step == 4) {
|
|
led_step = 0;
|
|
} else {
|
|
led_step++;
|
|
}
|
|
}
|
|
|
|
//TODO: this seems a messy way to populate the pwm register
|
|
//populate the 9 byte rows to be written to each pin, first byte is register (pin) address
|
|
for(i=1; i<9; i++) {
|
|
pwm_reg_array[i]=pwm_levels[led_step];
|
|
}
|
|
for(i=0; i<8; i++) {
|
|
pwm_reg_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
|
|
is31_write_data(0, pwm_reg_array, 9);
|
|
chThdSleepMilliseconds(5);
|
|
}
|
|
break;
|
|
|
|
/* case LED_MSG_SLEEP_LED_ON:
|
|
// save current settings
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
|
|
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
|
|
// use pages 7 and 8 for (hardware) breathing (assuming they're empty)
|
|
is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
|
|
is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
|
|
retval = MSG_TIMEOUT;
|
|
temp = 6;
|
|
while(retval == MSG_TIMEOUT) {
|
|
// switch to the other page
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
|
|
temp = (temp == 6 ? 7 : 6);
|
|
// the times should be sufficiently long for IS31 to finish switching pages
|
|
retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
|
|
}
|
|
// received a message (should be a wakeup), so restore previous state
|
|
chThdSleepMilliseconds(3000); // need to wait until the page change finishes
|
|
// note: any other messages are queued
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
|
|
break;
|
|
case LED_MSG_SLEEP_LED_OFF:
|
|
// should not get here; wakeup should be received in the branch above break;
|
|
break;
|
|
default:
|
|
//TODO: individual led state unchanged if page arrays are selected in code above
|
|
//avoidable if full pages are written on the fly
|
|
//or use pg8 for individual leds, have pointer to currently on led address for toggling
|
|
if (msg == 0x59 || msg == 0x84) {
|
|
//toggle lock keys on all layers
|
|
for (i=0,i<8,i++) {
|
|
is31_read_register(0, msg, &temp);
|
|
pwm = (temp > 0x00 ? 0x00 : 0xFF);
|
|
is31_write_register(i,msg,pwm);
|
|
}
|
|
|
|
} else if(msg >= 0x24) {
|
|
xprintf("Power pre-read\ntemp: %X - msg: %X - pwm: %X\n", temp, msg, pwm);
|
|
is31_read_register(7, msg, &temp);
|
|
xprintf("Post-read\ntemp: %X - msg: %X - pwm: %X\n", temp, msg, pwm);
|
|
if (msg == active_led) {
|
|
//toggle led power
|
|
pwm = (temp > 0x00 ? 0x00 : 0xFF);
|
|
|
|
//Use 8th led page for individual led indicators
|
|
is31_write_register(7, msg, pwm);
|
|
} else {
|
|
is31_write_register(7, active_led, 0x00);
|
|
is31_write_register(7, msg, 0xFF);
|
|
}
|
|
xprintf("Power post-change\ntemp: %X - msg: %X - pwm: %X\n", temp, msg, pwm);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
|
}
|
|
break;
|
|
*/
|
|
}
|
|
xprintf("--------------------\n");
|
|
}
|
|
}
|
|
|
|
|
|
/* ========================
|
|
* led bit processing
|
|
* ======================== */
|
|
void set_led_bit (uint8_t *led_control_reg, uint8_t msg_led, uint8_t toggle_on) {
|
|
uint8_t row_byte, column_bit;
|
|
//msg_led tens column is pin#, A-control register is every other 8 bits
|
|
//ones column is bit position in 8-bit mask
|
|
//control register will be one bit shifted into position along register's full 0x12 bytes
|
|
////first byte is register address 0x00
|
|
row_byte = ((msg_led / 10) % 10 - 1 ) * 2 + 1;
|
|
column_bit = 1<<(msg_led % 10 - 1);
|
|
|
|
if (toggle_on) {
|
|
led_control_reg[row_byte] |= 1<<(column_bit);
|
|
} else {
|
|
led_control_reg[row_byte] &= ~1<<(column_bit);
|
|
}
|
|
}
|
|
|
|
void set_lock_leds(uint8_t *led_control_reg, uint8_t lock_status) {
|
|
uint8_t i;
|
|
|
|
switch (lock_status) {
|
|
case 1:
|
|
set_led_bit(led_control_reg, CAPS_LOCK_LED_ADDRESS, 1);//TODO: define lock addresses by matrix#, and loop for all frames
|
|
set_led_bit(led_control_reg, NUM_LOCK_LED_ADDRESS, 0);
|
|
break;
|
|
case 2:
|
|
set_led_bit(led_control_reg, CAPS_LOCK_LED_ADDRESS, 0);
|
|
set_led_bit(led_control_reg, NUM_LOCK_LED_ADDRESS, 1);
|
|
break;
|
|
case 3:
|
|
set_led_bit(led_control_reg, NUM_LOCK_LED_ADDRESS, 1);
|
|
set_led_bit(led_control_reg, CAPS_LOCK_LED_ADDRESS, 1);
|
|
break;
|
|
}
|
|
|
|
for(i=1; i<8; i++) { //keep LED_OFF layer all off, including locks
|
|
is31_write_data (i, led_control_reg, 0x12+1);
|
|
chThdSleepMilliseconds(5);
|
|
}
|
|
}
|
|
|
|
void write_led_page (uint8_t page, const uint8_t *led_array, uint8_t led_count) {
|
|
//TODO: init function that accepts array of led addresses and sets them by row
|
|
uint8_t i;
|
|
uint8_t row, col;
|
|
uint8_t temp_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
|
|
xprintf("-------------\n");
|
|
xprintf("write page %X\n", page);
|
|
|
|
for(i=0;i<led_count;i++){
|
|
row = ((led_array[i] / 10) % 10 - 1 ) * 2 + 1;//includes 1 byte shift for 0x00 address
|
|
col = 1<<(led_array[i] % 10 - 1);
|
|
|
|
temp_control_reg[row] |= 1<<(col);
|
|
}
|
|
|
|
is31_write_data(page, temp_control_reg, 0x13);
|
|
xprintf("-------------\n");
|
|
}
|
|
/* =====================
|
|
* hook into user keymap
|
|
* ===================== */
|
|
void led_controller_init(void) {
|
|
uint8_t i;
|
|
|
|
/* initialise I2C */
|
|
/* I2C pins */
|
|
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
|
|
palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
|
|
/* start I2C */
|
|
i2cStart(&I2CD1, &i2ccfg);
|
|
// try high drive (from kiibohd)
|
|
I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
|
|
// try glitch fixing (from kiibohd)
|
|
I2CD1.i2c->FLT = 4;
|
|
|
|
chThdSleepMilliseconds(10);
|
|
|
|
/* initialise IS31 chip */
|
|
is31_init();
|
|
|
|
/* enable LEDs on all pages */
|
|
full_page[0] = 0;
|
|
__builtin_memcpy(full_page+1, is31_ic60_leds_mask, 0x12);
|
|
for(i=0; i<8; i++) {
|
|
is31_write_data(i, full_page, 1+0x12);
|
|
}
|
|
|
|
//set Display Option Register so all pwm intensity is controlled from Frame 1
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME);
|
|
|
|
/* enable breathing when the displayed page changes */
|
|
// Fade-in Fade-out, time = 26ms * 2^N, N=3
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
|
|
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
|
|
|
|
// clean up the lock LEDs
|
|
//TODO: adjust for new addressing and additional frames
|
|
//is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
|
|
//is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
|
|
|
|
/* more time consuming LED processing should be offloaded into
|
|
* a thread, with asynchronous messaging. */
|
|
chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
|
|
chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
|
|
}
|
|
|
|
//TODO: Don't know equivalent QMK hooks for these
|
|
//
|
|
//void hook_usb_suspend_entry(void) {
|
|
//#ifdef SLEEP_LED_ENABLE
|
|
// chSysLockFromISR();
|
|
// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_ON);
|
|
// chSysUnlockFromISR();
|
|
//#endif /* SLEEP_LED_ENABLE */
|
|
//}
|
|
//
|
|
//void hook_usb_suspend_loop(void) {
|
|
// chThdSleepMilliseconds(100);
|
|
// /* Remote wakeup */
|
|
// if((USB_DRIVER.status & 2) && suspend_wakeup_condition()) {
|
|
// send_remote_wakeup(&USB_DRIVER);
|
|
// }
|
|
//}
|
|
//
|
|
//void hook_usb_wakeup(void) {
|
|
//#ifdef SLEEP_LED_ENABLE
|
|
// chSysLockFromISR();
|
|
// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_OFF);
|
|
// chSysUnlockFromISR();
|
|
//#endif /* SLEEP_LED_ENABLE */
|
|
//}
|
|
//*/
|