mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-26 19:18:03 +06:00
|
…
|
||
|---|---|---|
| .. | ||
| keymaps | ||
| config.h | ||
| info.json | ||
| matrix_diagram.md | ||
| readme.md | ||
| rules.mk | ||
waffling60 Rev. E ANSI
A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support. Revision E adds underglow and rotary encoder support.
More info: https://github.com/4pplet/waffling60
- Keyboard Maintainer: 4pplet
- Hardware Supported: waffling60
Make example for this keyboard (after setting up your build environment):
make 4pplet/waffling60/rev_e_ansi:default
Flashing example for this keyboard:
make 4pplet/waffling60/rev_e_ansi:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
How to enter bootloader (DFU):
- Short the reset-header (labled BL/RESET) on the back of the PCB for about 2 seconds for the keyboard to enter DFU. When in DFU, it's ready to flash the firmware. If using a APM MCU it will not automatically reset after flash. Simply short the reset-header for a very short time to just reset the PCB, alternatively unplug and repluck the USB-cable to the keyboard.
Alternative option if the firmware is already pre-flashed:
- Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.