mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-23 00:47:02 +06:00
Code Issues Packages Projects Releases Wiki Activity
d8aec71e48
keychron_qmk_firmware/keyboards/cannonkeys/db60
History
Ryan 76cc7fe109
Move matrix config to info.json, part 6 (#20019)
2023-03-11 00:32:05 +11:00
..
hotswap Migrate some more layouts to data driven (#19889) 2023-02-23 09:32:18 +11:00
j02 Migrate some more layouts to data driven (#19889) 2023-02-23 09:32:18 +11:00
keymaps cannonkeys/db60/hotswap: fix layouts (#18982) 2022-11-07 16:16:41 +11:00
rev2 Migrate some more layouts to data driven (#19889) 2023-02-23 09:32:18 +11:00
chconf.h
config.h Move matrix config to info.json, part 6 (#20019) 2023-03-11 00:32:05 +11:00
halconf.h
info.json Move matrix config to info.json, part 6 (#20019) 2023-03-11 00:32:05 +11:00
mcuconf.h
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

CannonKeys DB60

DB60 "Daughterboard 60" Keyboard

  • Keyboard Maintainer: Andrew Kannan
  • Hardware Supported: STM32F072CBT6 (or equivalent)

Make example for this keyboard (after setting up your build environment):

make cannonkeys/db60/rev2:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Some notes about the versions: The original DB60 was shipped with the J-02. To build that, you will need to use the following command:

make cannonkeys/db60/j02:default

Solderable DB60s were shipped with keyboards after the J-02. This variant has cutouts along the top and bottom to support O-ring gasket mounting. To build these, you can use this command:

make cannonkeys/db60/rev2:default

Hotswap ANSI DB60s were shipped with the Bakeneko keyboards from CannonKeys. These also have the o-ring gasket mounting points. To build this:

make cannonkeys/db60/hotswap:default