mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 17:37:40 +06:00
1fe7743af8
* Fix issue with data transfer of CS1_SW7 to CS18_SW7. * Fix issue with handling of scaling register buffer's dirty flag. * Remove unused extern declaration. * Compaction of struct is31_led utilizing bit fields.
256 lines
8.5 KiB
C
256 lines
8.5 KiB
C
/* Copyright 2017 Jason Williams
|
|
* Copyright 2018 Jack Humbert
|
|
* Copyright 2018 Yiancar
|
|
* Copyright 2020 MelGeek
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "wait.h"
|
|
|
|
#include "is31fl3741.h"
|
|
#include <string.h>
|
|
#include "i2c_master.h"
|
|
#include "progmem.h"
|
|
|
|
// This is a 7-bit address, that gets left-shifted and bit 0
|
|
// set to 0 for write, 1 for read (as per I2C protocol)
|
|
// The address will vary depending on your wiring:
|
|
// 00 <-> GND
|
|
// 01 <-> SCL
|
|
// 10 <-> SDA
|
|
// 11 <-> VCC
|
|
// ADDR1 represents A1:A0 of the 7-bit address.
|
|
// ADDR2 represents A3:A2 of the 7-bit address.
|
|
// The result is: 0b101(ADDR2)(ADDR1)
|
|
#define ISSI_ADDR_DEFAULT 0x60
|
|
|
|
#define ISSI_COMMANDREGISTER 0xFD
|
|
#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
|
|
#define ISSI_INTERRUPTMASKREGISTER 0xF0
|
|
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
|
|
#define ISSI_IDREGISTER 0xFC
|
|
|
|
#define ISSI_PAGE_PWM0 0x00 // PG0
|
|
#define ISSI_PAGE_PWM1 0x01 // PG1
|
|
#define ISSI_PAGE_SCALING_0 0x02 // PG2
|
|
#define ISSI_PAGE_SCALING_1 0x03 // PG3
|
|
#define ISSI_PAGE_FUNCTION 0x04 // PG4
|
|
|
|
#define ISSI_REG_CONFIGURATION 0x00 // PG4
|
|
#define ISSI_REG_GLOBALCURRENT 0x01 // PG4
|
|
#define ISSI_REG_PULLDOWNUP 0x02 // PG4
|
|
#define ISSI_REG_RESET 0x3F // PG4
|
|
|
|
#ifndef ISSI_TIMEOUT
|
|
# define ISSI_TIMEOUT 100
|
|
#endif
|
|
|
|
#ifndef ISSI_PERSISTENCE
|
|
# define ISSI_PERSISTENCE 0
|
|
#endif
|
|
|
|
#define ISSI_MAX_LEDS 351
|
|
|
|
// Transfer buffer for TWITransmitData()
|
|
uint8_t g_twi_transfer_buffer[20] = {0xFF};
|
|
|
|
// These buffers match the IS31FL3741 and IS31FL3741A PWM registers.
|
|
// The scaling buffers match the PG2 and PG3 LED On/Off registers.
|
|
// Storing them like this is optimal for I2C transfers to the registers.
|
|
// We could optimize this and take out the unused registers from these
|
|
// buffers and the transfers in IS31FL3741_write_pwm_buffer() but it's
|
|
// probably not worth the extra complexity.
|
|
uint8_t g_pwm_buffer[DRIVER_COUNT][ISSI_MAX_LEDS];
|
|
bool g_pwm_buffer_update_required = false;
|
|
bool g_scaling_registers_update_required[DRIVER_COUNT] = {false};
|
|
|
|
uint8_t g_scaling_registers[DRIVER_COUNT][ISSI_MAX_LEDS];
|
|
|
|
void IS31FL3741_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
|
|
g_twi_transfer_buffer[0] = reg;
|
|
g_twi_transfer_buffer[1] = data;
|
|
|
|
#if ISSI_PERSISTENCE > 0
|
|
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
|
|
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
|
|
}
|
|
#else
|
|
i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
|
|
#endif
|
|
}
|
|
|
|
bool IS31FL3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
|
|
// unlock the command register and select PG2
|
|
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
|
|
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM0);
|
|
|
|
for (int i = 0; i < 342; i += 18) {
|
|
if (i == 180) {
|
|
// unlock the command register and select PG2
|
|
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
|
|
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM1);
|
|
}
|
|
|
|
g_twi_transfer_buffer[0] = i % 180;
|
|
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 18);
|
|
|
|
#if ISSI_PERSISTENCE > 0
|
|
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
|
|
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, ISSI_TIMEOUT) != 0) {
|
|
return false;
|
|
}
|
|
}
|
|
#else
|
|
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, ISSI_TIMEOUT) != 0) {
|
|
return false;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
// transfer the left cause the total number is 351
|
|
g_twi_transfer_buffer[0] = 162;
|
|
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + 342, 9);
|
|
|
|
#if ISSI_PERSISTENCE > 0
|
|
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
|
|
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, ISSI_TIMEOUT) != 0) {
|
|
return false;
|
|
}
|
|
}
|
|
#else
|
|
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, ISSI_TIMEOUT) != 0) {
|
|
return false;
|
|
}
|
|
#endif
|
|
|
|
return true;
|
|
}
|
|
|
|
void IS31FL3741_init(uint8_t addr) {
|
|
// In order to avoid the LEDs being driven with garbage data
|
|
// in the LED driver's PWM registers, shutdown is enabled last.
|
|
// Set up the mode and other settings, clear the PWM registers,
|
|
// then disable software shutdown.
|
|
// Unlock the command register.
|
|
|
|
// Unlock the command register.
|
|
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
|
|
|
|
// Select PG4
|
|
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
|
|
|
|
// Set to Normal operation
|
|
IS31FL3741_write_register(addr, ISSI_REG_CONFIGURATION, 0x01);
|
|
|
|
// Set Golbal Current Control Register
|
|
IS31FL3741_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF);
|
|
// Set Pull up & Down for SWx CSy
|
|
IS31FL3741_write_register(addr, ISSI_REG_PULLDOWNUP, 0x77);
|
|
|
|
// IS31FL3741_update_led_scaling_registers(addr, 0xFF, 0xFF, 0xFF);
|
|
|
|
// Wait 10ms to ensure the device has woken up.
|
|
wait_ms(10);
|
|
}
|
|
|
|
void IS31FL3741_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
|
|
if (index >= 0 && index < DRIVER_LED_TOTAL) {
|
|
is31_led led = g_is31_leds[index];
|
|
|
|
g_pwm_buffer[led.driver][led.r] = red;
|
|
g_pwm_buffer[led.driver][led.g] = green;
|
|
g_pwm_buffer[led.driver][led.b] = blue;
|
|
g_pwm_buffer_update_required = true;
|
|
}
|
|
}
|
|
|
|
void IS31FL3741_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
|
|
for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
|
|
IS31FL3741_set_color(i, red, green, blue);
|
|
}
|
|
}
|
|
|
|
void IS31FL3741_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
|
|
is31_led led = g_is31_leds[index];
|
|
|
|
if (red) {
|
|
g_scaling_registers[led.driver][led.r] = 0xFF;
|
|
} else {
|
|
g_scaling_registers[led.driver][led.r] = 0x00;
|
|
}
|
|
|
|
if (green) {
|
|
g_scaling_registers[led.driver][led.g] = 0xFF;
|
|
} else {
|
|
g_scaling_registers[led.driver][led.g] = 0x00;
|
|
}
|
|
|
|
if (blue) {
|
|
g_scaling_registers[led.driver][led.b] = 0xFF;
|
|
} else {
|
|
g_scaling_registers[led.driver][led.b] = 0x00;
|
|
}
|
|
|
|
g_scaling_registers_update_required[led.driver] = true;
|
|
}
|
|
|
|
void IS31FL3741_update_pwm_buffers(uint8_t addr1, uint8_t addr2) {
|
|
if (g_pwm_buffer_update_required) {
|
|
IS31FL3741_write_pwm_buffer(addr1, g_pwm_buffer[0]);
|
|
}
|
|
|
|
g_pwm_buffer_update_required = false;
|
|
}
|
|
|
|
void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue) {
|
|
g_pwm_buffer[pled->driver][pled->r] = red;
|
|
g_pwm_buffer[pled->driver][pled->g] = green;
|
|
g_pwm_buffer[pled->driver][pled->b] = blue;
|
|
|
|
g_pwm_buffer_update_required = true;
|
|
}
|
|
|
|
void IS31FL3741_update_led_control_registers(uint8_t addr, uint8_t index) {
|
|
if (g_scaling_registers_update_required[index]) {
|
|
// unlock the command register and select PG2
|
|
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
|
|
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_SCALING_0);
|
|
|
|
// CS1_SW1 to CS30_SW6 are on PG2
|
|
for (int i = CS1_SW1; i <= CS30_SW6; ++i) {
|
|
IS31FL3741_write_register(addr, i, g_scaling_registers[0][i]);
|
|
}
|
|
|
|
// unlock the command register and select PG3
|
|
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
|
|
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_SCALING_1);
|
|
|
|
// CS1_SW7 to CS39_SW9 are on PG3
|
|
for (int i = CS1_SW7; i <= CS39_SW9; ++i) {
|
|
IS31FL3741_write_register(addr, i - CS1_SW7, g_scaling_registers[0][i]);
|
|
}
|
|
|
|
g_scaling_registers_update_required[index] = false;
|
|
}
|
|
}
|
|
|
|
void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue) {
|
|
g_scaling_registers[pled->driver][pled->r] = red;
|
|
g_scaling_registers[pled->driver][pled->g] = green;
|
|
g_scaling_registers[pled->driver][pled->b] = blue;
|
|
|
|
g_scaling_registers_update_required[pled->driver] = true;
|
|
}
|