mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-25 18:06:34 +06:00

History

Ryan c505ea48b3 Add haptic driver to keyboard.json schema (#23591 )		2024-04-24 04:59:57 +01:00
..
keymaps
config.h
handwire.c
keyboard.json	Add haptic driver to keyboard.json schema (#23591 )	2024-04-24 04:59:57 +01:00
readme.md

Hardware Abstraction Handwire

A hotswap 60% keyboard with an arrow key cluster. Board features support for an OLED screen, push pull solenoid, and an active buzzer.

Keyboard Maintainer: Andy Tsai
Hardware Supported: ATMEGA32U4, Push-Pull Solenoid, Active Buzzer, SSD1306 128x32 OLED
Hardware Availability: https://hardwareabstraction.com

Make example for this keyboard (after setting up your build environment):

make hardwareabstraction/handwire:default

Flashing example for this keyboard:

make hardwareabstraction/handwire:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
Physical reset button: Briefly press the button on the top left side of the PCB. You can alternatively short the two pads vertically with a pair of tweezers.
Keycode in layout: Press the key mapped to QK_BOOT if it is available. This can be configured in VIA or on the QMK configurator.