mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-30 21:38:01 +06:00
Code Issues Packages Projects Releases Wiki Activity
d206c1791e
keychron_qmk_firmware/keyboards/handwired/snatchpad
History
Ryan 764dc18a81
Remove NO_ACTION_MACRO and NO_ACTION_FUNCTION from keyboard config.h (#16655)
2022-03-15 13:56:58 +00:00
..
keymaps/default
config.h Remove NO_ACTION_MACRO and NO_ACTION_FUNCTION from keyboard config.h (#16655) 2022-03-15 13:56:58 +00:00
info.json
readme.md
rules.mk
snatchpad.c
snatchpad.h

readme.md

snatchpad

snatchpad etch-a-sketch macropad

A 6-key macropad with 2 rotary encoders intended for use as a pointing device.

In addition to the 3d printed parts and microcontroller, the following hardware is required:

  • 4 * 3x3 mm threaded inserts
  • 4 * 4mm M3 bolt
  • USB daughter board
  • Keyboard Maintainer: xia0
  • Hardware Supported: e.g. Arduino Pro Micro
  • Hardware Availability: github

Make example for this keyboard (after setting up your build environment):

make handwired/snatchpad:default

Flashing example for this keyboard:

make handwired/snatchpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available